Audi A3 8P Upper Door Moulding Strip Front Left N/S Ibis White - Y9C

Visual condition of the part

The product shows signs of use visible in the photos.

Audi A3 8P Upper Door Moulding Strip Front Left N/S Ibis White - Y9C is an original body component designed for precise installation on the front left door. Thanks to its factory fitment and the correct Ibis White – Y9C paint shade, the moulding allows for an aesthetic and technically correct repair of the side body section. It is a practical solution when replacing a damaged moulding or during bodywork and painting, where visual consistency and proper fitment are essential.

Specifications and technical data

• SKU: 8P4853953A-IWH
• Mark: Audi
• Condition: Used
• OEM Part Number: 8P4853953A
• Substitutable numbers: 8P4853953A, 8P4 853 953 A
• Location on the vehicle: Front, Left
• Color: Ibis White - Y9C
• Category: Doors & Door Skins

Purpose and function of the component

The presented upper door moulding has been designed specifically for installation on the front left door of the Audi A3 8P. It is responsible for the aesthetic finish of the upper edge of the door skin, while also helping to maintain the correct body line and preventing dirt from entering sensitive areas near the window and seals.

The component belongs to the Doors and door panels group, meaning it works in conjunction with the outer door skin, seals, and side window, contributing to visual surface continuity and proper door closing.

Color and paint matching

The moulding is finished in the factory Ibis White – Y9C color, characteristic of many Audi vehicles. Using the original shade allows you to reduce or completely eliminate the need for repainting, which shortens repair time and reduces costs. In practice, this means:

• a visually consistent appearance of the side body section,
• easier matching to the existing paint on the door and fender,
• preservation of the factory finish character.

Installation characteristics

As a body component intended for the front left side, the moulding is prepared for installation at the original mounting points on the Audi A3 8P door. The design provided by the vehicle manufacturer facilitates correct alignment relative to the door edge and adjacent panels, which is important for both aesthetics and seal integrity.

The used nature of the part makes it a cost-effective solution while allowing you to maintain the original geometry and mounting method intended for this model.

Practical application

This type of upper door moulding is particularly useful in situations where mechanical damage or corrosion of the existing component has occurred, as well as for post-collision repairs involving the side of the body. Replacing the moulding allows you to:

• restore the correct line of the door and adjacent panels,
• replace a missing or deformed trim element,
• maintain color consistency across the entire side of the vehicle.

Complementary Audi body components

If you are planning a comprehensive repair or upgrade of the door area in your Audi and need other components from the same group, such as door skins, lower mouldings, or edge reinforcements, check out the available parts in the Audi Doors and door panels category.

Why choose an original used component

Choosing an original, used door moulding is a reasonable compromise between costs and maintaining factory body parameters. You receive a component designed exactly for the specific model, with the correct geometry and prepared for installation at the intended mounting points, which reduces the risk of fitment issues.

If you want to better understand how to safely use recycled parts and how they can lower repair costs, it is worth reading our guide: Brake calipers under the microscope: How to effectively reduce brake system repair costs by choosing proven recycled parts.