Toyota Verso R2 Mk2 Front Door Seal Rubber Gasket Right O/S 67861-0F020

Toyota Verso R2 Mk2 Front Door Seal Rubber Gasket Right O/S is an original body component designed for installation on the front right door. It ensures a tight seal between the door leaf and the body, improving acoustic insulation, water protection, and door operation stability during daily use.

Specifications and technical data

• SKU: 678610F020
• Mark: Toyota
• Condition: Used
• OEM Part Number: 678610F020
• Substitutable numbers: 678610F020, 67861-0F020
• Location on the vehicle: Front, Right
• Part type: Door Seal
• Category: Door Seals

Purpose and fitment

The presented seal is factory-designed for the second-generation Toyota Verso (R2 Mk2) model and is mounted on the front right door. Thanks to a design consistent with the manufacturer's specifications, it maintains the correct contact geometry with the door frame and pillar, which reduces the risk of leaks and unwanted wind noise while driving. The component belongs to the Door seals group, responsible for separating the passenger cabin from external factors. A properly selected seal supports the operation of the lock and hinges, stabilizing the position of the door leaf once closed.

Construction and technical function

The seal is made of flexible rubber material with appropriately selected hardness, which allows for repeatable deformation when opening and closing the door without losing its sealing properties. The cross-sectional profile has been designed to:

• create a continuous barrier against water and moisture around the door perimeter,
• reduce noise penetration from the outside into the cabin,
• minimize vibrations and squeaking in the contact area between the door and the body,
• maintain stable adhesion across a wide range of operating temperatures. By maintaining the original mounting geometry, the seal works with the factory mounting points on the door and body, which facilitates correct seating without the need for modifications.

Condition of the component and benefits of use

The offered seal is an original Toyota brand component in used condition, which allows for maintaining factory fitment and door operation parameters. Compared to low-quality replacements, this reduces the risk of issues such as doors not closing properly, noise generation at higher speeds, or water leaks in critical points. The use of this seal is particularly justified in the case of:

• noticeable wind noise in the area of the right front pillar,
• trace water leaks after heavy rain or car washes,
• wear, brittleness, or local cracks in the existing seal,
• post-accident repairs within the right front door area.

Installation and service aspects

The seal is prepared for installation in the factory location on the front right door. With a correctly performed replacement, it is possible to:

• restore the proper seal of the door perimeter,
• reduce noise levels in the cabin at highway speeds,
• limit the risk of corrosion in the sill and pillar area resulting from moisture ingress. Due to the nature of the component, it is recommended to thoroughly clean the contact surfaces on the door and body before installation, which improves the durability of the connection and the stability of the seal's operation over the long term.

Expansion of repair scope and technical knowledge

If you are planning a comprehensive repair or upgrade of the door area in your vehicle and need other elements from the same group, such as seals, moldings, or guides, check the available parts in the Toyota Door seals category. For a better understanding of the impact of component condition on service costs and the cost-effectiveness of using used parts, it is worth reading the comparative analysis of power units – you will find practical information in the article Volkswagen 1.9 TDI vs 1.4 TSI – evolution of VW engines and repair costs, which shows how to consciously plan repairs using components from the secondary market.