Audi RS6 C7 Front Door Seal Gasket Right O/S Inner Rubber 4G0837480

Audi RS6 C7 Front Door Seal Gasket Right O/S Inner Rubber is a precisely fitted body component responsible for effective water drainage from the window and protection of the door edge. The original design for Audi models ensures proper adhesion to the glass and door frame, which translates into stable operation of the window lifting mechanism and reduction of unwanted noise. As a result, this window scraper seal is a functional solution for repairs and renovations of the door on the driver's or passenger's side, on the right side of the vehicle.

Specifications and technical data

• SKU: 4G0837480
• Mark: Audi
• Condition: Used
• OEM Part Number: 4G0837480
• Substitutable numbers: 4G0837480, 4G0 837 480
• Location on the vehicle: Front, Right
• Category: Door Seals

Purpose and technical function

The presented seal is an element from the Door seals group, designed specifically for installation on the front right door in the Audi RS6 C7 generation. Its task is to scrape water and contaminants from the glass surface during its movement, as well as to stabilize the edge of the glass in the guide. A properly selected seal reduces the risk of moisture entering the inside of the door, which promotes a longer service life of the window lifting mechanism and electrical components.

Placement on the vehicle on the front right side allows for precise fitting to the factory door profile, without the need for modifications or fitting universal replacements. Thanks to this, the installation is predictable, and the final effect is consistent with the vehicle manufacturer's assumptions.

Benefits of using an original window scraper seal

Using a dedicated window scraper seal in the Audi RS6 C7 brings a number of practical benefits:

• better guidance of the glass in the channel, which promotes smooth operation of the lifting mechanism,
• reduction of water and dirt ingress into the inside of the door,
• reduction of the risk of creaks and rattles in the area of the window frame,
• maintaining a consistent visual line of the glass edge and door.

For users who pay attention to acoustic comfort and proper window closing, a properly selected door scraper seal is an important element in body repairs and restoring factory performance parameters.

Product characteristics and installation

The seal is intended for installation on the front right door, in the contact zone between the glass and the upper edge of the door skin. The design adapted to the specific Audi model allows for installation in place of the factory element, while maintaining the original geometry and mounting points. The product comes from the Audi Brand parts group, which facilitates maintaining technical consistency with other body elements.

The used condition means that the element was previously in use, however, it can still perform its function in the vehicle, being a reasonable choice for repairs where structural compliance and cost control are important. In practice, such a seal is often chosen for replacements after collisions, door repairs, or when there are problems with window guidance.

Application in service and renovation of the Audi RS6 C7

In high-performance vehicles such as the Audi RS6 C7, proper door sealing is important not only for aesthetics but also for utility. A well-selected scraper seal:

• supports maintaining the proper rigidity of the glass edge,
• limits air drafts at higher speeds,
• helps maintain acoustic comfort inside the cabin.

This element is particularly important during comprehensive repairs of the right door, when other components such as guides or window lifting mechanisms are also replaced. Using a part matched to the specific Audi model allows you to avoid problems with leaks and improper window closing.

If you are planning a comprehensive repair or upgrade of the door area in your Audi and need other elements from the same group, such as sealing strips, edge seals, or additional scraper profiles, check the available parts in the Audi door seals category.

Practical tips for choosing a used seal

When choosing a used scraper seal, it is worth paying attention to the condition of the working surface, the flexibility of the material, and the method of attachment to the door. A properly selected element allows you to avoid problems with leaks and accelerated wear of the glass. For those who are planning wider modifications or body tuning using used components, a guide describing typical mistakes when choosing such parts may be helpful – you can find it in the article Buying used car parts • Most common mistakes when choosing tuning parts.