Skoda Superb B6 Door Inner Seal Rubber Gasket Front Left Right N/O/S 3T0867365

Skoda Superb B6 Door Inner Seal Rubber Gasket Front Left Right is an original component from the Door seals group, designed for installation on the front driver or passenger side doors. The used seal ensures a factory fit, stable routing along the door perimeter, and effective reduction of noise and moisture penetration into the vehicle interior.

Specifications and technical data

• SKU: 3T0867365
• Mark: Skoda
• Condition: Used
• OEM Part Number: 3T0867365
• Substitutable numbers: 3T0867365, 3T0 867 365
• Location on the vehicle: Front, Left, Right
• Category: Door Seals

Purpose and function of the door seal

The presented seal has been designed specifically for Skoda front doors, with the possibility of application on both the left and right sides. Its task is to create a tight barrier between the door edge and the body, which translates into:

• reduction of wind noise at higher speeds,
• limitation of water and moisture ingress into the interior,
• stable door closing without looseness or rattling,
• protection of door edges and paintwork against abrasion.

Thanks to a design consistent with Skoda's factory standards, the seal works with original door locks, hinges, and fittings, maintaining the correct contact geometry.

Construction and body fitment

The seal is profiled for the specific body line of the Skoda Superb B6, which facilitates installation and ensures repeatable, tight adhesion along the entire door perimeter. The flexible working material withstands typical deformations resulting from opening and closing the doors, and the properly selected profile hardness allows for:

• secure seating in the mounting slot,
• shape retention over a long period of use,
• proper cooperation with adjacent seals and door sill trims.

The original Skoda origin means dimensional compatibility with factory mounting points and no need for modifications or forced fitting.

Installation zone: front, left and right side

The seal is intended for installation in the front part of the body, on the driver's and passenger's side doors. This solution allows for the use of one type of element in two locations, which facilitates service and repair planning. In practice, this means:

• the possibility of replacing a single seal in selected doors,
• consistent appearance and door operation characteristics on both sides of the vehicle,
• maintaining uniform tightness throughout the entire front cabin zone.

To maintain full functionality, it is recommended to install the seal on a clean, degreased door edge surface, checking for correct positioning in the corners and by the pillars.

Condition of the item and benefits of using OEM parts

The offered seal is a used item, which in practice means a beneficial combination of original manufacturing quality and an attractive price compared to a new part. Compared to low-budget replacements, using an OEM component allows you to maintain:

• factory fitment with the door and body,
• predictable material behavior at different temperatures,
• compatibility with existing interior trim elements.

For the user, this means stable door operation, reduction of unwanted sounds while driving, and improvement of cabin acoustic comfort without interfering with the body structure.

Support with selection and additional information

For this model, dedicated manufacturer markings and interchangeable numbers are provided, which facilitates verification of compatibility with a specific equipment version. In case of doubt, it is worth comparing the shape and mounting method with the currently installed seal in the vehicle or using the help of an advisor by providing vehicle data.

If you are planning a comprehensive repair or upgrade of the door zone in your Skoda and need other elements from the same group, such as additional perimeter seals, sill seals, or pillar seals, check the available parts in the Skoda door seals category.

For users interested in a broader approach to vehicle modernization and service, including selecting components according to factory markings and compatibility with a specific engine or body version, the Global Parts guide may be helpful – BMW B58 code – checklist before buying a turbocharger and intercooler, which shows how to verify part compatibility on the secondary market step by step.