Range Rover Velar L560 Front Lower Control Arm Wishbone Left N/S J9D3-3C255-BB

Range Rover Velar L560 Front Lower Control Arm Wishbone Left N/S is a component from the Control Arms and Ball Joints group, designed for operation in the front suspension on the driver's side. The original Land Rover design ensures proper geometry, stable vehicle handling, and predictable body behavior during braking and cornering.

Specifications and technical data

• SKU: LR141989
• Mark: Land Rover
• Condition: Used
• OEM Part Number: LR141989
• Substitutable numbers: LR141989, J9D33C255BB, J9D3-3C255-BB
• Location on the vehicle: Front, Left
• Part type: Control Arm & Ball Joint Assembly
• Category: Control Arms, Ball Joints & Assemblies

Purpose and function in the suspension

The described control arm is designed for installation on the front axle on the left side, where it is responsible for precise wheel guidance and maintaining the specified toe and camber angles. As a load-bearing element working with the ball joint and other suspension components, it transfers loads from the wheel to the body, stabilizing the operation of the entire system.

Thanks to its factory geometry, the control arm helps reduce uneven tire wear, improves stability at higher speeds, and supports the effectiveness of safety systems such as ABS or traction control.

Original origin and fitment

The control arm comes from the Land Rover range, which means maintaining factory strength parameters and compatibility with the mounts in the Range Rover Velar L560. The original sockets for bushings and the ball joint allow for correct installation without the need for modifications, and the proper shape of the arm facilitates geometry alignment after replacement.

For certainty in part selection, you can use the manufacturer's markings – the product has an assigned OEM part number and interchangeable numbers, which allow you to verify compatibility with a specific vehicle version.

Benefits of using a pre-owned OEM control arm

Choosing a pre-owned OEM control arm for the Range Rover Velar L560 is a reasonable compromise between cost and quality. You receive a component with factory specifications that:

• maintains correct suspension geometry and driving stability,
• works with standard ball joints and bushings,
• is structurally matched to the front axle on the left side,
• allows for cost savings compared to a new part while maintaining proper fitment.

Thanks to this, the control arm will work well both for standard replacement of worn elements and for repairs after mechanical suspension damage.

Professional installation and operation

Due to its key role in wheel guidance, installation by an experienced service center is recommended, followed by an axle geometry alignment. A correctly installed control arm minimizes suspension play, improves steering response, and affects driving comfort, especially when combined with properly selected shock absorbers and a stabilizer.

To fully utilize the potential of this element, it is worth periodically checking the condition of the metal-rubber bushings and the ball joint, as well as reacting to the first signs of wear, such as knocking, vehicle pulling, or instability during braking.

Expanding your knowledge of suspension

If you want to better understand how control arms work with shock absorbers and stabilizers in modern cars, check out the guide: Suspension system – a comprehensive guide to shock absorbers, control arms, and stabilizers. This is a practical supplement to your knowledge when planning repairs or suspension upgrades.

Related Land Rover suspension components

If you are planning a comprehensive repair or upgrade of the suspension area in your Land Rover and need other elements from the same group, such as additional control arms, ball joints, or mounting hardware, check out the available parts in the Land Rover Control Arms and Ball Joints category.