Ford Ranger Mk6 Front Axle Lower Control Arm Wishbone Left N/S AB31-3079-AG

Ford Ranger Mk6 Front Axle Lower Control Arm Wishbone Left N/S is a component from the Control arms and ball joints group, designed to operate in the demanding front axle suspension system. It is responsible for precise wheel guidance, driving stability, and correct geometry, which translates into predictable vehicle behavior both off-road and on asphalt.

Specifications and technical data

• SKU: AB31-3079-AG
• Mark: Ford
• Condition: Used
• OEM Part Number: AB31-3079-AG
• Substitutable numbers: AB31-3079-AG, AB313079AG, 2237738, EB3C-3079-C2C, EB3C3079C2C
• Location on the vehicle: Front, Left
• Category: Control Arms, Ball Joints & Assemblies

Application and function in the Ford Ranger Mk6 suspension

The presented lower control arm is designed for installation on the front axle on the left side, where it works in conjunction with other suspension components such as springs, shock absorbers, and ball joints. Its task is to maintain the correct position of the wheel hub relative to the body, limit unwanted lateral movements, and transfer loads generated during braking, acceleration, and driving over uneven surfaces.

Thanks to the properly selected geometry of the control arm, the steering system maintains predictable characteristics, and the tire has stable contact with the road surface. This is important for both safety and even tire wear.

Benefits of using an original Ford component

The control arm comes from the Ford brand offer, which means maintaining the factory suspension performance parameters. The original design ensures:

• precise fit to the mounting points on the frame and steering knuckle,
• consistency with the factory vehicle handling characteristics,
• compatibility with standard ball joints and other system components.

Such a solution is particularly important in a utility vehicle like the Ranger, where the suspension works under variable loads and in diverse road conditions. Using an original control arm helps maintain vehicle stability when towing, driving with a load, and in light off-road conditions.

Characteristics of the used component

The offered control arm is a used component, which allows for an economical suspension repair while maintaining the manufacturer's original specifications. This type of part is a good choice when factory geometry and compatibility are required, while a reasonable service cost is also important. Before installation, it is recommended to perform a standard inspection of the mounting points and cooperating ball joints to ensure the entire system works cohesively.

Vehicle placement and installation aspects

The control arm is intended for installation on the front of the vehicle on the driver's side (left side). In practice, this means it is necessary to follow the correct order of disassembly and assembly of the suspension components on that side, followed by a wheel geometry adjustment. After replacement, it is recommended to perform a wheel alignment to fully utilize the steering system's capabilities and avoid premature tire wear.

Technical support and selection of suspension components

If you want to better understand how control arms work in a set with shock absorbers and stabilizers, and how to diagnose symptoms of suspension wear, check out our guide material Suspension system – a comprehensive guide to shock absorbers, control arms, and stabilizers. This is a practical addition to your knowledge when planning repairs or upgrades to the chassis system.

If you are planning a comprehensive repair or upgrade of the front suspension area in your Ford and need other components from the same group, such as additional control arms, ball joints, or mounting elements, check out the available parts in the Ford Control arms and ball joints category.