Audi Q5 FY Rear Axle Front Section Control Arm Wishbone Right O/S 80A505292

The Right Front Lower Control Arm for the Rear Axle of the Audi Q5 FY is an original part from the Control Arms and Ball Joints group, designed for precise operation within the rear axle suspension. Engineered by Audi, it ensures correct wheel geometry, driving stability, and predictable vehicle behavior during everyday use.

Specifications and technical data

• SKU: 80A505292
• Mark: Audi
• Condition: Used
• OEM Part Number: 80A505292
• Substitutable numbers: 80A505292, 80A 505 292
• Location on the vehicle: Front, Rear, Right
• Part type: Control Arm & Ball Joint Assembly
• Category: Control Arms, Ball Joints & Assemblies

Purpose and Vehicle Placement

The presented control arm is dedicated for use within the rear axle of the Audi Q5 FY generation, specifically in the front section of this axle, on the right side of the vehicle. This placement means the component is responsible for:

• maintaining the correct wheel position relative to the body,
• stable vehicle handling during load changes and braking,
• controlling toe and camber angles on the rear axle.

Thanks to its precise fit with Audi's suspension design, the control arm works in conjunction with other system components, reducing unwanted play and improving the predictability of the car's reactions.

Technical and Functional Characteristics

As an original Audi part, the control arm has been designed to maintain the suspension's factory operating parameters. The construction intended for installation on the rear axle, in the front section on the right side, ensures:

• appropriate arm stiffness while simultaneously damping vibrations,
• cooperation with ball joints and other suspension mounting points,
• stable transfer of longitudinal and lateral forces acting on the wheel.

A component configured in this way helps to reduce excessive tire wear, improves traction, and contributes to driving comfort, particularly noticeable at higher speeds and on uneven surfaces.

Component Condition and Service Application

The control arm is offered as a used part, allowing for economical suspension repair while maintaining the original Audi construction. This type of component is suitable for situations where:

• mechanical damage to the control arm has occurred due to impact or corrosion,
• there is play in the suspension, felt as instability in the rear of the vehicle,
• replacement of the component is necessary to restore correct wheel geometry.

Using an original control arm from the same design group facilitates maintaining suspension parameter consistency and reduces the risk of fitting issues during installation.

Benefits of Using an Original Audi Control Arm

Choosing an original control arm for the Audi Q5 FY offers a range of practical service and operational benefits:

• Factory Fitment – maintaining correct mounting points and suspension geometry without the need for modifications.
• Compatibility with Other System Components – proper cooperation with ball joints, shock absorbers, and other suspension arms.
• Stable Vehicle Handling – reduction of unwanted wheel movements, which impacts safety and the predictability of the car's behavior.

For workshops and private users, this translates to easier diagnostics, simpler installation, and a lower risk of geometry alignment issues after the repair is completed.

Technical Support and Additional Materials

If you are planning a comprehensive repair or upgrade of the suspension area in your Audi and require other parts from the same group, such as additional control arms, ball joints, or mounting elements, check the available parts in the Audi Control Arms and Ball Joints category.

To better plan your service work and understand the relationships between individual suspension components, it is worth consulting the advice contained in the article Suspension System – A Comprehensive Guide to Shock Absorbers, Control Arms, and Stabilizers, which discusses practical aspects of operating and diagnosing these sub-assemblies.