Audi Q5 FY Rear Wishbone Track Trailing Control Arm Left N/S 80A501531A

Audi Q5 FY Rear Wishbone Track Trailing Control Arm Left N/S is a component from the Wishbones and ball joints group, designed for the rear left side of the suspension in the Audi Q5 FY generation. This factory-engineered solution allows for the restoration of correct axle geometry, handling stability, and predictable vehicle behavior during daily operation.

Specifications and technical data

• SKU: 80A501531A
• Mark: Audi
• Condition: Used
• OEM Part Number: 80A501531A
• Substitutable numbers: 80A501531A, 80A 501 531 A, 80A501529A, 80A 501 529 A
• Location on the vehicle: Rear, Left
• Category: Control Arms, Ball Joints & Assemblies

Purpose and function in the suspension system

The presented wishbone operates in the rear part of the vehicle on the left side, contributing to the wheel guidance system in the Audi Q5 FY. It is responsible for maintaining the correct position of the hub relative to the body, stabilizing the driving path, and controlling camber and toe angles, which translates into confident handling and even tire wear.

Thanks to its precise fit to the Audi suspension design, the wishbone works in harmony with other components from the Wishbones and ball joints group, ensuring consistent transfer of dynamic loads during braking, acceleration, and driving over uneven surfaces.

Benefits of using the original rear left wishbone

Using this wishbone model in the Audi Q5 FY allows for maintaining factory suspension performance parameters without the need for structural modifications to the vehicle. The component is ready for installation in the location specified by the manufacturer, which facilitates service and reduces the risk of geometry issues after replacement.

• Restoration of correct wheel guidance on the rear axle.
• Improved vehicle stability at higher speeds and in corners.
• Reduced risk of premature tire wear resulting from incorrect wheel alignment angles.
• Consistent cooperation with other Audi Q5 FY suspension components.

This solution is particularly recommended for replacement after a collision, after detecting play in the suspension, or after a failed attempt at wheel alignment when adjustment no longer allows for values within the manufacturer's tolerances.

Vehicle placement and installation aspects

The wishbone has been designed to work in the rear part of the vehicle on the left side, which is crucial when selecting the correct component for a specific mounting point. Correct placement on the vehicle is essential for maintaining the symmetry of suspension operation and proper force distribution in the system.

During installation, it is recommended to:

• check the condition of other components in the wishbone and ball joint group on the rear axle,
• apply the appropriate tightening torques in accordance with Audi service documentation,
• perform a wheel alignment after completing the work to fully utilize the potential of the newly installed wishbone.

Component condition and service application

The offered wishbone is in Used condition, meaning it has been removed from a vehicle and is intended for further use after positive verification of its suitability. This type of component is a good choice in situations where you want to maintain the original Audi suspension design while optimizing repair costs.

In practice, it will work well both for point replacement of a damaged element and for broader service work within the rear axle, covering several wishbones and ball joints simultaneously.

Technical support and expanding suspension knowledge

If you want to better understand how to properly maintain the suspension system, recognize signs of wear, and plan replacements for components such as shock absorbers, wishbones, or stabilizers, it is worth checking out the guide: Suspension system – a comprehensive guide to shock absorbers, wishbones, and stabilizers. This is a practical addition to your knowledge when planning service work on your Audi.

If you are planning a comprehensive repair or upgrade of the suspension area in your Audi and need other components from the same group, such as additional wishbones, ball joints, or guidance elements, check out the available parts in the Audi wishbones and ball joints category.