Audi A6 C8 Q5 FY Suspension Spring Control Arm Track Front Left N/S 80A407151A

Audi A6 C8 Q5 FY Suspension Spring Control Arm Track Front Left N/S is an original component from the Control arms and ball joints group, designed for the front suspension on the driver's side. Engineered by Audi, it ensures proper steering geometry, stable handling, and predictable vehicle behavior during braking and cornering.

Specifications and technical data

• SKU: 80A407151A
• Mark: Audi
• Condition: Used
• OEM Part Number: 80A407151A
• Substitutable numbers: 80A407151A, 80A 407 151 A
• Location on the vehicle: Front, Left
• Category: Control Arms, Ball Joints & Assemblies

Purpose and function in the suspension system

This control arm is responsible for the precise guidance of the wheel in the longitudinal and transverse axes, maintaining the specified toe-in, and ensuring body stability during load changes. The vehicle placement is front, left side, which is crucial when selecting parts for a specific Audi A6 C8 or Q5 FY suspension configuration.

A properly selected control arm minimizes unwanted play, reduces vibrations transmitted to the body, and supports even tire wear. In combination with properly functioning shock absorbers and other suspension components, it allows for a stable driving path even at higher speeds.

Benefits of using an original Audi control arm

The original Audi control arm from the Control arms and ball joints category is designed for a specific vehicle platform, ensuring it maintains factory mounting points and the correct operating characteristics of the joints. This translates into:

• confident front axle handling during dynamic driving,
• consistent operation with the factory steering and braking systems,
• proper cooperation with other multi-link suspension components,
• maintenance of the manufacturer-specified wheel camber and toe angles.

The element from this group is particularly important in cases of noticeable knocking from the front, the car pulling while driving straight, or uneven tread wear. Replacing a worn control arm with an original component allows you to restore factory driving characteristics without the need for suspension modifications.

Condition, fitment, and installation

The product is offered as a used original part, which allows you to combine factory fitment with a more favorable cost compared to a new OE part. Before installation, it is recommended to perform a standard inspection of the mounting points, joints, and bushings for any play or potential operational damage.

The control arm is intended for installation in the front suspension on the left side, so when selecting, pay attention to compatibility with the body version and suspension system of your specific Audi A6 C8 or Q5 FY. After replacement, it is recommended to perform a wheel alignment to fully utilize the potential of the newly installed component.

Technical support and selection by numbers

When selecting a control arm for a specific car, it is crucial to check compatibility by OEM number and suspension configuration. If you want to streamline the part identification process and avoid mistakes, use the practical tips described in the guide how to select the right car part by VIN and OEM number, where you will find a step-by-step procedure and a list of questions helpful in verifying used components.

For users who want to better understand the role of control arms in the entire chassis system, the educational material Suspension system – a comprehensive guide to shock absorbers, control arms, and stabilizers will also be useful, discussing the relationships between individual suspension elements and the impact of their condition on driving safety.

Related Audi suspension components

If you are planning a comprehensive repair or upgrade of the front suspension area in your Audi and need other elements from the same group, such as additional control arms, ball joints, or mounting hardware, check out the available parts in the Audi control arms and ball joints category.