Audi Q3 8U Rear Axle Wishbone Suspension Control Arm Right O/S 3C0505224D

Audi Q3 8U Rear Axle Wishbone Suspension Control Arm Right O/S is a component from the Control arms and ball joints category, designed for the rear right side of the suspension. It is responsible for precise wheel guidance, body stability, and proper axle geometry, which translates into predictable vehicle handling and driving comfort.

Specifications and technical data

• SKU: 3C0505224D
• Mark: Audi
• Condition: Used
• OEM Part Number: 3C0505224D
• Substitutable numbers: 3C0505224D, 3C0 505 224 D
• Location on the vehicle: Rear, Right
• Category: Control Arms, Ball Joints & Assemblies

Purpose and function in the suspension

The presented control arm is dedicated to the rear axle on the right side of the Audi Q3 8U model. As a wheel-guiding component, it works with other suspension parts to maintain the correct camber and toe angles, as well as to limit unwanted wheel movement relative to the body.

Thanks to its properly selected geometry and structural rigidity, the control arm helps maintain vehicle stability during acceleration, braking, and cornering. This is important for both safety and even tire wear.

Construction and technical characteristics

The rear right control arm in the Audi Q3 8U is designed as a load-bearing element, transferring vertical, lateral, and longitudinal loads from the wheel to the body. The design is intended to work with ball joints and metal-rubber bushings, which dampen vibrations and compensate for suspension movements.

Key features of this component include:

• dedicated placement in the rear zone, on the right side,
• compatibility with the factory Audi Q3 8U suspension system,
• designed to maintain factory axle geometry.

This solution allows for consistency with other suspension components and facilitates installation in place of the original part.

Benefits of use and installation aspects

Using the correct control arm in the rear right part of the suspension contributes to:

• driving stability – limiting uncontrolled geometry changes under load,
• handling comfort – better vibration damping and predictable vehicle reactions,
• safety – proper wheel guidance supports the effectiveness of the braking system and driver assistance systems.

The element is intended for installation in place of the factory control arm, which allows for maintaining the original handling characteristics of the Audi. It is recommended to perform the installation at a specialized service center, using appropriate tightening torques and subsequent wheel geometry alignment.

Condition and practical application

The offered control arm is a used part, which allows for economical suspension repair while maintaining compliance with the manufacturer's design. This solution is particularly beneficial for comprehensive rear axle maintenance when it is necessary to replace several elements at once.

If you are planning a comprehensive repair or upgrade of the suspension area in your Audi and need other elements from the same group, such as additional control arms, ball joints, or mounting hardware, check the available parts in the Audi Control arms and ball joints category.

Technical support and suspension knowledge

For a better understanding of suspension operation and the role of control arms in driving safety, it is worth consulting specialized materials. Practical information on the diagnostics and operation of suspension components can be found in the article Suspension system – a comprehensive guide to shock absorbers, control arms, and stabilizers, which discusses typical signs of wear and good service practices.

If you want to plan your car's maintenance more broadly and learn about other components that most often require replacement, the guide TOP 10 most frequently replaced parts in your car may also be helpful, containing practical tips on operation and service cost optimization.