VW Sharan 7N Rear Wishbone Control Arm Axle Suspension Left N/S 3C0505223C

VW Sharan 7N Control Arm Rear Left is an original part from the Control Arms & Ball Joints group, designed for the rear axle on the left side. The precise geometry of this component supports stable vehicle handling, correct alignment maintenance, and predictable car behavior in corners.

Specifications and technical data

• SKU: 3C0505223C
• Mark: Volkswagen
• Condition: Used
• OEM Part Number: 3C0505223C
• Substitutable numbers: 3C0505223C, 3C0 505 223 C
• Location on the vehicle: Rear, Left
• Category: Control Arms, Ball Joints & Assemblies

Function of the Control Arm in the Suspension System

The rear axle transverse control arm is responsible for stable wheel guidance relative to the body and for transferring loads generated during acceleration, braking, and traversing uneven surfaces. Its placement on the rear of the vehicle, on the left side, means this element directly influences:

• maintaining correct suspension geometry under load,
• even tire wear,
• vehicle control during dynamic maneuvers,
• driving comfort over transverse unevenness.

A well-chosen transverse control arm limits unwanted wheel displacement, which translates to predictable car reactions and more confident handling.

Why Choose an Original Volkswagen Control Arm

The original control arm dedicated to the VW Sharan 7N has been designed for full compatibility with the factory suspension system. This means maintaining the correct stiffness, appropriate operating characteristics, and correct positioning of mounting points relative to the body and wheel hub.

Key advantages of using an original part include:

• secure fit to factory mounting points,
• retention of the manufacturer's designed handling characteristics,
• reduced risk of incorrect alignment after replacement,
• consistency with other suspension system components.

This solution is particularly beneficial for repairs of vehicles used for family purposes or on longer journeys, where predictable car behavior is crucial.

Intended Use and Installation on the Rear Axle

The presented control arm is intended for installation on the rear of the vehicle, on the left side, which is important when selecting parts for vehicles with multi-link suspension. Proper placement on the vehicle facilitates service work while maintaining the geometric consistency of the entire rear axle.

During installation, it is recommended to:

• inspect other suspension elements in the same area,
• check the condition of bushings and joints cooperating with the control arm,
• perform wheel alignment after the replacement is completed.

This approach allows for the full utilization of the potential of the newly installed element and reduces the need for further interventions in a short period.

Technical Support and Selecting the Right Part

The transverse control arm belongs to a group of elements where compliance with OEM numbers and interchangeable numbers is crucial. This allows for precise verification of compatibility with a specific VW Sharan 7N version and avoidance of installation problems. If in doubt, it is worth comparing the markings with the vehicle documentation or consulting a mechanic.

If you are planning a comprehensive repair or upgrade of the rear suspension area in your Volkswagen and need other parts from the same group, such as additional control arms, ball joints, or mounting elements, check the available parts in the Volkswagen Control Arms & Ball Joints category.

More Knowledge About Suspension and Used Parts

To better understand the role of control arms in the operation of the entire system, it is worth reading the guide describing the cooperation of shock absorbers, control arms, and stabilizers – practical tips can be found in the article Suspension System – A Comprehensive Guide to Shock Absorbers, Control Arms, and Stabilizers.

If you want to make informed choices when selecting components from the aftermarket and reduce the risk of a wrong purchase, the expert material on professional selection of used car parts and OEM compliance verification will also be helpful.