BMW E81 E87 E89 E90 E91 Tension Strut Front Right O/S Control Arm Wishbone

BMW E81 E87 E89 E90 E91 Tension Strut Front Right O/S Control Arm Wishbone is a component from the Control arms and ball joints group, designed for precise wheel guidance and suspension geometry stabilization. This used, original BMW component ensures proper compatibility with the factory suspension system, which translates into predictable vehicle behavior and confident handling in daily use.

Specifications and technical data

• SKU: 2405862-1
• Mark: BMW (Genuine OE)
• Condition: Used
• OEM Part Number: 2405862
• Substitutable numbers: 31122405862, 2405862, 31126769798, 6769798, 31124036270, 4036270, 31126769802, 6769802
• Location on the vehicle: Front, Right
• Category: Control Arms, Ball Joints & Assemblies

Purpose and function in the suspension

This front right control arm for the BMW 1 Series, 3 Series, and Z4 is responsible for the stable connection between the steering knuckle and the chassis, as well as controlling the wheel position relative to the road. As a tension strut, it operates in the longitudinal axis, absorbing forces generated during braking, acceleration, and driving over bumps, which limits unwanted toe changes and improves directional stability.

Its location on the vehicle is the front right side, meaning this component has a direct impact on steering precision and driver comfort. A properly selected control arm helps reduce vibrations transmitted to the chassis and steering wheel, and also supports even tire wear.

Compatibility and fitment for BMW

The BMW front right control arm has been developed specifically for the suspension geometry of the E81, E87, E89, E90, and E91 models, ensuring correct mounting points and the appropriate arm length. This maintains the factory handling characteristics without the need to modify other suspension components.

Its original BMW origin means consistency with other chassis components, such as other control arms, ball joints, or the stabilizer bar. This is especially important during precise geometry adjustment after replacement, where dimensional compliance and proper performance under load are critical.

Condition, advantages of the used part, and technical aspects

The offered control arm is in used condition, which allows for an economical repair while maintaining the original BMW design. In many cases, such a component represents a reasonable compromise between cost and quality, especially when you want to maintain factory suspension specifications without resorting to cheaper aftermarket replacements with uncertain parameters.

Key advantages of this solution include:

• Factory fitment for the front right suspension mounts, with no modifications required.
• Consistency with the original performance characteristics of the BMW chassis.
• Suitability for professional repairs or restoring a vehicle to a near-factory state.

Installation and maintenance tips

When replacing the control arm, it is recommended to simultaneously check other elements from the Control arms and ball joints group, in particular the metal-rubber bushings and ball joints, to avoid rapid, uneven wear and the need for further suspension work. After installation, it is necessary to perform a wheel alignment to fully utilize the properties of the newly installed component and ensure stable vehicle handling.

Proper installation by an experienced service center and tightening bolts while the suspension is under load help maintain joint durability and reduce stress on the bushings. This is particularly important in BMW vehicles, where the precision of the chassis has a direct impact on driving comfort and safety.

If you are planning a comprehensive repair or upgrade of the front suspension area in your BMW and need other parts from the same group, such as additional control arms, ball joints, or mounts, check out the available parts in the BMW Control arms and ball joints category.

To better understand the role of these types of components in the chassis and the symptoms of wear, it is worth consulting a technical guide – you will find practical information in the article Suspension system – a comprehensive guide to shock absorbers, control arms, and stabilizers, which discusses the relationships between individual components and their impact on driving safety.

If you are also interested in the economic and environmental aspects of using used components, the material Circular economy in your garage – how choosing used parts from dismantling really supports environmental protection and your wallet? may be helpful, showing how conscious selection of second-hand parts fits into a modern approach to vehicle maintenance.