Audi A3 8P Control Arm Rear Lower Suspension Wishbone Rear Right O/S 1K0505224K

Audi A3 8P Lower Rear Right Control Arm is a component from the Control Arms & Ball Joints category, designed for the rear right suspension of the Audi A3 8P model. This solution is for users who expect stable handling, predictable vehicle behavior, and correct rear axle geometry while maintaining the factory suspension characteristics.

Specifications and technical data

• SKU: 1K0505224K
• Mark: Audi
• Condition: Used
• OEM Part Number: 1K0505224K
• Substitutable numbers: 1K0505224K, 1K0 505 224 K
• Location on the vehicle: Rear, Right
• Category: Control Arms, Ball Joints & Assemblies

Purpose and Fitment for Audi A3 8P

The presented lower control arm has been specifically designed for the rear right axle of the Audi A3 8P. Its construction matches the factory solution used in this model, allowing for the preservation of correct mounting points, suspension kinematics, and compatibility with other cooperating standard components such as other control arms, springs, or shock absorbers.

This ensures a predictable installation process, and after replacement, proper wheel alignment (toe and camber) can be achieved, which translates to driving stability and even tire wear.

Construction Characteristics of the Control Arm

The lower rear axle control arm in the Audi A3 8P is responsible for maintaining the correct wheel position relative to the body and for transferring loads generated during acceleration, braking, and cornering. Its geometry has been developed to provide a balance between ride comfort and handling precision.

The control arm works with ball joints and rubber-metal bushings, which limit vibration transfer to the body while maintaining adequate system stiffness. A correctly selected and installed component helps minimize play in the suspension, which is particularly important during dynamic driving and sudden maneuvers.

Benefits of Using an Original Rear Control Arm

Using a control arm dedicated to the Audi A3 8P rear right axle allows for the preservation of the vehicle's factory driving characteristics. Key benefits include:

• Restoration of correct suspension geometry – reducing vehicle pulling, instability during braking, and excessive tire wear.
• Better vehicle control – more predictable rear axle reactions to uneven surfaces and in corners.
• Compatibility with standard components – no need for modifications to other suspension parts.
• Consistency with factory handling characteristics – maintaining comfort and vehicle behavior as intended by the manufacturer.

Item Condition and Installation Aspects

The offered control arm is in used condition, making it an economical solution for drivers seeking a technically sound replacement on a limited budget. Before installation, a standard inspection of the component by a mechanic is recommended, and after installation – a wheel alignment should be performed to fully utilize the suspension's potential.

The control arm is designed for installation in place of the factory component on the rear right axle, using the standard mounting points. This makes the replacement process predictable for most workshops specializing in VAG group vehicle suspensions.

More About Audi A3 8P Control Arms and Suspension

If you are looking for other products from the Control Arms & Ball Joints category dedicated to this brand, check out our offer on Audi Control Arms & Ball Joints to select a complete solution for your entire suspension.

Want to better understand how to properly care for your suspension system and when to replace control arms in your Audi A3 8P? Read our guide “Suspension System – A Comprehensive Guide to Shock Absorbers, Control Arms, and Stabilizers”, where you will find practical tips on diagnosing and maintaining suspension components.