Ford Focus Mk3 Front Right O/S Windscreen Drip Moulding Trim BM51-A03194-AD

Visual condition of the part

The product shows signs of use visible in the photos.

Ford Focus Mk3 Front Right O/S Windscreen Drip Moulding Trim is a precisely fitted body component responsible for the controlled drainage of water from the edge of the windshield. Thanks to its factory profile, it ensures a stable seal at the contact point between the glass and the bodywork and limits the ingress of debris into the cowl area. This is a practical solution for users who want to maintain proper aerodynamics and the aesthetics of the front body section.

Specifications and technical data

• SKU: BM51-A03194-AD
• Mark: Ford
• Condition: Used
• OEM Part Number: BM51-A03194-AD
• Substitutable numbers: BM51-A03194-AD, BM51A03194AD, 1796560
• Location on the vehicle: Front, Right
• Category: Car Glass

Purpose and function of the component

The described drip moulding is designed for installation on the front windshield on the right side of the third-generation Ford Focus model. Its tasks include:

• directing water runoff from the glass surface along the edge of the body,
• reducing moisture accumulation in the cowl and pillar area,
• protecting the space near the windshield seals from excessive dirt,
• maintaining a consistent visual line between the glass and the bodywork.

Thanks to its proper profile, the moulding works with the factory shape of the windshield and the front of the body, which translates into proper adhesion and a lower risk of wind noise while driving.

Compatibility and OEM identification

The element belongs to the Car windows group, but serves a protective and drainage function at the junction of the glass and the body. It is a part structurally intended for Ford, so when selecting it, it is crucial to compare the shape and placement on the vehicle. The product has a dedicated OEM number and interchangeable numbers, which facilitates clear identification and selection of the correct variant for a specific body version.

In case of doubts regarding fitment, it is worth verifying compatibility by part number and mounting side (front, right side) to avoid problems with installation and alignment with the windshield.

Installation and operational characteristics

The moulding is prepared for installation in the factory mounting points around the passenger-side windshield. When correctly installed, it:

• ensures uniform adhesion along the entire length of the windshield edge,
• does not require interference with the body structure,
• maintains the gap between the glass and the body within the range intended by the manufacturer.

As a used aftermarket element, the moulding is a reasonable choice for accident repairs, windshield replacement, or restoring the completeness of covers in the front zone. This allows for cost reduction while maintaining original geometry and mounting method.

The importance of original used body components

Using original, used body components is important not only for correct installation but also for the subsequent value of the vehicle. Maintaining consistency with factory specifications has a positive impact on the car's assessment during resale. You can find more on this topic in the article Original used parts vs. car resale price – how not to lose money?, which discusses the practical aspects of selecting such elements.

Completing the windshield zone in a Ford

If you are planning a comprehensive repair or upgrade of the windshield zone in your Ford and need other elements from the same group, such as seals, drip mouldings, or additional covers near the windshield, check the available parts in the Ford car windows category.