Ford Kuga Mk2 Brake Caliper Front Left N/S 320mm 1824922

Ford Kuga Mk2 Brake Caliper Front Left N/S 320mm designed for a 320 mm diameter brake disc is a braking system component engineered by the vehicle manufacturer. The original design ensures stable brake pad guidance, even pressure distribution on the disc, and predictable vehicle behavior during braking. This solution is dedicated to the front axle on the driver's side, prepared for operation in demanding service conditions.

Specifications and technical data

• SKU: 1824922
• Mark: Ford
• Condition: Used
• OEM Part Number: 1824922
• Substitutable numbers: 1824922, BV61-2B302-AC, BV612B302AC
• Location on the vehicle: Front, Left
• Part type: Brake Caliper
• Category: Calipers & Brackets

Purpose and vehicle placement

The presented brake caliper is intended for installation on the front axle on the left side of the second-generation Ford Kuga model. The design is adapted to work with a 320 mm diameter disc, which is important for the correct selection of the component and maintaining appropriate braking force. The placement on the vehicle is factory-defined, ensuring the caliper maintains the correct geometry relative to the disc and hub, as well as proper brake pad guidance. This translates into repeatable, predictable system performance in daily operation.

Design and performance parameters

The caliper belongs to the Brake calipers and brackets group, meaning it is responsible for both generating braking force and stably holding the pads in the correct operating position. The housing has been designed to operate at high temperatures and under variable loads, typical for the front axle of an SUV segment vehicle. The original Ford solution ensures:

• appropriately selected caliper housing rigidity,
• precise pad guidance in the carrier,
• even pressure distribution on the friction surface,
• consistency with the factory characteristics of the Ford Kuga Mk2 braking system. Thanks to this, compatibility with the stock master cylinder, lines, and other system components is maintained, which facilitates service and reduces the risk of fitment issues.

Characteristics of the used component

The offered caliper is a used item, sourced from vehicle dismantling. This type of part represents a reasonable compromise between repair costs and maintaining the manufacturer's original specifications. In practice, this means the ability to restore the efficiency of the braking system while maintaining factory operating parameters, without the need to resort to cheaper replacements with uncertain manufacturing tolerances. Choosing an original, used caliper is particularly beneficial in situations where you want to maintain the material and structural consistency of the entire braking system while simultaneously reducing repair costs compared to purchasing a new component.

Selection, installation, and service aspects

When selecting a caliper for the Ford Kuga Mk2, it is crucial to pay attention to the installation side, disc diameter, and compatibility with the braking system of the specific vehicle version. This caliper model has been designed for operation on the front axle on the left side, in a configuration with a 320 mm disc, which facilitates clear identification and installation for the mechanic. During installation, it is recommended to:

• check the condition of the guide pins and mounting points,
• verify the condition of the brake disc and pads,
• bleed the system after connecting the brake line,
• check for leaks after the first braking cycles. Such an approach allows you to fully utilize the potential of the original caliper and ensure stable, repeatable braking in daily vehicle use.

Technical support and additional information

If you want to better understand how to safely use used braking system components and how to optimally select a caliper for your car, it is worth consulting expert material. Practical tips regarding selection, condition inspection, and ways to reduce service costs can be found in the article Brake calipers under the microscope: How to effectively reduce braking system repair costs by choosing proven recycled parts. If you are planning a comprehensive repair or upgrade of the braking zone in your Ford and need other components from the same group, such as carriers, mounts, or additional brackets, check the available parts in the Ford Brake calipers and brackets category.