Ford Ranger Mk4 Wheel Brake Caliper Housing Front Right O/S 2M34-2B118-BB

Visual condition of the part

The product shows signs of use visible in the photos.

Ford Ranger Mk4 Wheel Brake Caliper Housing Front Right O/S is an original brake system component designed for installation on the front axle on the passenger side. As part of the Brake Calipers and Brackets group, it ensures stable pad guidance and uniform transfer of braking force to the disc, which translates into predictable vehicle behavior. Using an OEM component allows for a technically correct replacement of a worn caliper without interfering with the system's design.

Specifications and technical data

• SKU: 1454526
• Mark: Ford
• Condition: Used
• OEM Part Number: 1454526
• Substitutable numbers: 1454526, 2M34-2B118-BB, 2M342B118BB
• Location on the vehicle: Front, Right
• Part type: Brake Caliper
• Category: Calipers & Brackets

Purpose and vehicle placement

The presented caliper is dedicated for installation on the front right side of the vehicle, which is significant for both the brake system geometry and compatibility with the steering knuckle mounts and brake disc. The design, adapted to the specific side of the vehicle, facilitates the correct connection of the brake line and bleeder screw, minimizing the risk of incorrect installation.

This element is particularly useful when replacing a unilaterally damaged caliper, when you want to maintain the factory configuration of the brake system without the need to modify other components.

Technical and functional characteristics

As a part from the Brake Calipers and Brackets category, the caliper housing is responsible for precise piston guidance and stable seating of the brake pads relative to the disc. A correctly selected caliper:

• ensures uniform pressure of the pads against the disc during braking,
• maintains the proper working position of the pads throughout the entire suspension travel range,
• enables effective bleeding of the brake circuit on the given side,
• reduces the risk of the vehicle pulling during braking resulting from differences in front axle braking force.

The original OEM design is optimized for weight, rigidity, and resistance to thermal loads generated by intensive braking in a utility vehicle such as the Ford Ranger Mk4.

Benefits of using an original Ford caliper

Using an original brake caliper in the Ford Ranger Mk4 allows you to maintain the factory operating parameters of the brake system. Key advantages include:

• Full installation compatibility – the spacing of the mounts, the position of the sockets, and the guides are matched to the factory steering knuckle and brake disc.
• Consistency with other system elements – the caliper works with original lines, pads, and discs, without the need for adapters.
• The ability to restore proper system operation after seizure, corrosion, or mechanical damage to the previous element.

For vehicles operated in working conditions, such as towing, driving with a load, or off-road, maintaining the proper efficiency of the front calipers has a direct impact on safety and braking predictability.

Condition and use in service practice

The offered caliper is a used element, which allows for economical repair while maintaining the manufacturer's original specifications. This type of part will work well both for an emergency replacement of a damaged caliper and for staged brake system regeneration, when there is no need to replace the entire set with new components.

Before installation, standard service procedures are recommended, such as checking the condition of the brake line, pads, and disc on the right side of the front axle, in order to fully utilize the potential of the newly installed element and achieve uniform operation of the entire system.

If you are planning a comprehensive repair or upgrade of the braking zone in your Ford and need other elements from the same group, such as additional calipers, handles, or brackets, check the available parts in the Ford Brake Calipers and Brackets category.

Safe selection of used brake system elements

When choosing a used brake caliper, it is worth paying attention to compatibility with the specific vehicle version, the condition of the working surfaces, and the completeness of the mounts. To facilitate the verification process and reduce the risk of error when selecting components, you can use the practical tips described in the article Second-hand brake system: how to safely choose discs, calipers, and ABS?, where you will find a detailed checklist helpful when purchasing used brake elements.