Ford Kuga C520 Rear Bumper Reinforcement Impact Crash Bar Beam DV44-U403C94-AB

Ford Kuga C520 Rear Bumper Reinforcement Impact Crash Bar Beam is a key structural body component responsible for the controlled transfer of energy during a rear-end collision. This rear impact crash bar has been designed specifically for the Kuga C520 platform, ensuring proper geometry, rigidity, and compatibility with factory mounting points.

Specifications and technical data

• SKU: DV44-U403C94-AB
• Mark: Ford
• Condition: Used
• OEM Part Number: DV44-U403C94-AB
• Substitutable numbers: DV44-U403C94-AB, DV44U403C94AB, 1857271
• Location on the vehicle: Rear
• Part type: Bumper Reinforcement Beam
• Category: Bumpers & Reinforcements

Purpose and function of the component

The rear bumper reinforcement beam acts as a component for absorbing and dissipating collision energy, protecting the body structure, trunk floor, and components mounted in the rear of the vehicle. Its placement in the rear zone allows for:

• stable support of the bumper cover,
• maintaining correct body gaps and lines,
• limiting structural deformation during low and medium-energy collisions,
• maintaining predictable behavior of crumple zones.

Compatibility and fitment for Ford Kuga C520

The reinforcement has been developed for the Ford Kuga C520 body, ensuring it retains factory mounting points and the correct profile matched to the vehicle's rear structure. The appropriate geometry of the beam facilitates:

• precise alignment with longitudinal members and mounts,
• compatibility with the original bumper cover,
• maintaining the correct operation of crumple zones in the rear of the body. For proper part selection, it is recommended to verify compatibility with the specific Kuga C520 body version and compare the beam structure with the part removed from the vehicle.

Characteristics of the used component

The offered beam belongs to the Bumpers and reinforcements category and is a used component, which in practice means it comes from vehicle disassembly while maintaining its functional load-bearing structure. This type of part is a good solution in situations where:

• economical post-accident repair is necessary,
• maintaining the original Ford body structure is a priority,
• a solution consistent with factory assembly specifications is sought. Before installation, a standard surface inspection for any signs of previous stress and anti-corrosion preparation in accordance with workshop procedures is recommended.

Safety, installation, and service application

The rear bumper beam is a critical component for passive vehicle safety, therefore it should be installed in accordance with the manufacturer's procedures and using appropriate fasteners and tightening torques. In service practice, it is used primarily for:

• post-accident repairs of the rear body section,
• restoring the geometry of the collision zone,
• comprehensive replacement of a damaged bumper along with load-bearing elements. A correctly selected rear reinforcement helps maintain the vehicle's compliance with Ford's design assumptions, which is important for both safety and the vehicle's future resale value. If you are planning a comprehensive repair or upgrade of the collision zone in your Ford and need other components from the same group, such as reinforcement beams, cross-members, or load-bearing elements under the bumper, check the available parts in the Ford Bumpers and reinforcements category. For those interested in deepening their knowledge about selecting body components, cooling systems, or engine accessories in modern designs, the Global Parts service guide may be helpful – BMW B58 code, or 340 HP from the secondary market – a checklist before buying a turbocharger and intercooler for a BMW 3 Series (G20), which shows how to approach the verification of compatibility and quality of parts on the secondary market step by step.