Ford Ranger Mk6 2.2 Diesel Brake Servo Master Cylinder EB3C-2B195-HB

Ford Ranger Mk6 2.2 Diesel Brake Booster integrated with the master cylinder is a component designed for the braking system in the diesel engine version. This used part from the Brake Boosters and Proportioning Valves group ensures stable transfer of brake pedal pressure, resulting in predictable and safe speed reduction during the daily operation of the pickup truck.

Specifications and technical data

• SKU: RHD-EB3C-2B195-HB
• Mark: Ford
• Condition: Used
• OEM Part Number: EB3C-2B195-HB
• Substitutable numbers: EB3C-2B195-HB, EB3C2B195HB
• Fuel type: Diesel
• Part type: Brake Servo & Master Cylinder
• Category: Brake Servos

Purpose and Role in the Braking System

The brake booster integrated with the master cylinder is responsible for increasing braking force using vacuum and for precise pressure distribution in the brake circuits. In conjunction with a diesel engine, it provides adequate support for the heavier vehicle construction characteristic of the sixth-generation Ford Ranger.

This component is crucial for maintaining the correct brake pedal characteristics – from the initial phase of application to strong, emergency braking. A properly selected brake booster with a master cylinder allows for consistent system performance, which is important both when driving with a load and off-road.

Benefits of Using an Original Brake Booster with Master Cylinder

Using an original solution from the Brake Boosters and Proportioning Valves group in the Ford Ranger Mk6 ensures:

• maintenance of factory braking force characteristics and pedal travel,
• compatibility with the factory hydraulic and vacuum system,
• proper adaptation to the diesel engine version,
• reduced risk of malfunction of ABS and driver assistance systems.

This allows for an organized installation process, and after proper bleeding of the braking system, predictable vehicle response to every pedal application can be achieved.

Installation and Operational Characteristics

The brake booster with the master cylinder is structurally designed to work with the braking system of the sixth-generation Ford Ranger, facilitating installation in place of the original component. A used part allows for economical repair of the braking system while maintaining the manufacturer's original design concept.

Before installation, it is recommended to:

• check the tightness of hydraulic and vacuum connections,
• replace the brake fluid according to service recommendations,
• thoroughly bleed all brake circuits,
• verify brake pedal operation during a test drive.

This approach allows for full utilization of the component's potential and ensures stable operation of the braking system in daily use.

How to Care for Used Braking System Components

For used braking system components, regular servicing of the entire system is particularly important – checking lines, calipers, discs, and pads, as well as periodic fluid replacement. It is also good practice to use appropriate protective agents for metal parts against corrosion and to avoid prolonged driving with an excessively loaded vehicle, which reduces system strain.

If you want to better utilize the potential of used components and ensure their durability, it is worth familiarizing yourself with practical tips on maintenance and operation – you can find them in the article How to Extend the Lifespan of Used Car Parts?.

Ford Braking System Expansion

If you are planning a comprehensive repair or upgrade of the braking area in your Ford and need other parts from the same group, such as master cylinders, brake boosters, or proportioning valves, check the available parts in the Ford Brake Boosters and Proportioning Valves category.