BMW E90 E91 Hood Bonnet Front Monacoblau Monaco Blue Metallic - A35

Visual condition of the part

Possible scratches and paint chips – condition as shown in the product photos.

BMW E90 E91 Hood Engine Cover Monacoblau A35 is an original body part from the Hoods category, designed for installation on the front of the vehicle. The paint in the Monacoblau Metallic A35 shade ensures color consistency with the body, and the factory geometry guarantees proper alignment with the fenders, bumper, and grille.

Specifications and technical data

• SKU: 7140729-MB1
• Mark: BMW (Genuine OE)
• Condition: Used
• OEM Part Number: 7140729
• Substitutable numbers: 41617140729, 7140729
• Location on the vehicle: Front
• Color: Monacoblau Metallic - A35
• Category: Bonnet Panels

Intended Use and Fitment for BMW

This hood has been specifically designed for the BMW E90 and E91 series, ensuring the correct body line characteristic of this generation. The construction intended for front-end installation allows for correct gap alignment, proper closing, and compatibility with factory locks and hinges.

Thanks to the use of original geometry, the part does not require non-factory modifications after installation, and bodywork and painting can be limited to standard procedures for fitting the hood to a specific car instance.

Monacoblau Metallic A35 Color

The hood is finished in Monacoblau Metallic A35, a color characteristic of many BMW 3 Series E90/E91 models. This shade of metallic navy blue nicely accentuates the body lines and complements chrome and dark styling elements.

The factory paint in this color provides a good base for potential color matching with other body panels, making the painter's job easier and reducing the preparation time for the car after repair.

Body Part Characteristics

Installing a correctly chosen hood is important not only visually but also functionally. A properly fitted engine cover:

• ensures proper airflow over the engine compartment,
• contributes to the sealing of the front part of the body,
• enables correct operation of the lock mechanism and hinges,
• reduces the risk of unwanted vibrations and noises during driving.

A part from the Hoods category, selected for a specific BMW series, helps maintain the factory rigidity of the front body section and the deformation zones designed by the manufacturer.

Condition and Service Application

The hood is from the aftermarket, making it an attractive solution for collision repairs, restorations, and returning a car to a factory-like condition without the need for unknown origin replacements. This type of part is particularly useful when the priority is to maintain the original body structure while optimizing repair costs.

Before installation, standard bodywork verification and surface preparation according to the procedure adopted in the workshop are recommended to achieve a durable visual effect and adequate anti-corrosion protection.

BMW Hoods – Selecting the Right Parts

If you are planning a comprehensive front-end repair and need other body parts from the same group, such as additional covers or replacements for different body versions, check the available parts in the BMW Hoods category.

Practical User Tips

When replacing the hood, pay attention to the correct adjustment of gaps between body panels, lock adjustment, and even support on the hinges. Careful adjustment contributes to everyday usability, reduces the risk of rubbing against fenders, and improves the overall aesthetics of the vehicle.

If you want to better plan maintenance work on your car and find out which wear parts most often require replacement, the article with practical advice might be helpful: TOP 10 Most Frequently Replaced Parts in Your Car.