Audi A4 B7 Rear Door Lower Trim Strip Moulding Left N/S Phantom Black - Z9Y

Visual condition of the part

The product shows signs of use visible in the photos.

Audi A4 B7 Rear Door Lower Trim Strip Moulding Left N/S Phantom Black is an original body component from the Protective and decorative strips group, designed for installation on the rear left side of the vehicle. It provides an aesthetic finish to the lower edge of the door and additional protection against minor mechanical damage and dirt. Thanks to the factory Phantom Black – Z9Y color, it allows for maintaining a consistent paint appearance without the need for additional painting.

Specifications and technical data

• SKU: 8E0853969-PHB
• Mark: Audi
• Condition: Used
• OEM Part Number: 8E0853969
• Substitutable numbers: 8E0853969, 8E0 853 969
• Location on the vehicle: Rear, Left
• Color: Phantom Black - Z9Y
• Category: Body Mouldings & Trims

Purpose and function of the component

The offered moulding is dedicated to the Audi A4 B7 generation model and is mounted on the rear left door. Its purpose is to:

• protect the lower edge of the door against stone chips and road debris,
• mask any irregularities at the junction of the door panel and the sill,
• maintain the factory body line and stylistic consistency of the side of the car.

As an element from the Protective and decorative strips group, the moulding combines utility with aesthetics, improving the visual perception of the vehicle while simultaneously supporting paint protection.

Color and visual fit

The moulding is finished in Phantom Black – Z9Y, which allows for a precise match to the factory Audi paint in this shade. As a result:

• there is no need for additional painting while maintaining color consistency,
• the continuity of the side line and a uniform shade of the entire door surface are preserved,
• after installation, the element does not differ from other body components.

This solution is particularly beneficial for post-accident repairs or spot renovation of the side body, where a quick and aesthetic effect is essential.

Installation and compatibility

The moulding has been designed as an original Audi component, which translates into a proper fit to the door shape and correct adhesion to the sheet metal surface. The placement on the vehicle is clearly defined as rear – left side, which minimizes the risk of error when selecting the part.

Thanks to the factory geometry, installation is predictable, and the fit with the door edge and adjacent body elements is in accordance with the manufacturer's specifications. This is important both for professional body and paint repairs and for replacing a single element in service conditions.

Characteristics of the used product

The offered moulding is a used item, which in practice means a favorable cost-to-quality ratio while maintaining original origin. Such components are often chosen in situations where the priority is compliance with factory specifications and visual matching to the existing paint coating.

In the case of body repairs, the use of an original, used moulding allows for limiting the scope of paint work and shortening the time required to restore the vehicle to full visual condition.

Repair expansion – related Audi components

If you are planning a comprehensive repair or upgrade of the sill area and the lower part of the doors in your Audi and need other elements from the same group, such as covers, overlays, or additional strips, check the available parts in the Audi protective and decorative strips category.

Why choose original body components

Using original body components, such as the presented lower door moulding, reduces the risk of fitment issues, leaks, or differences in paint shade. In the case of more extensive drivetrain and body repairs, when you are also considering used mechanical elements, it is worth checking the cost-effectiveness analysis of OEM parts – this is discussed in detail in the article Humming differential? Why a used OEM drive axle is a better investment than an uncertain replacement.