Volkswagen Crafter Sy Driveshaft Front Axle Right O/S 2.0 TDI Diesel 2N0407272AA

Volkswagen Crafter Sy Driveshaft Front Axle Right O/S 2.0 TDI Diesel is an original drivetrain component from the Driveshafts group, designed for installation on the right side of the front axle in diesel-powered vehicles. This solution is engineered for stable torque transmission, precise drivetrain operation, and maintaining the vehicle's factory handling characteristics.

Specifications and technical data

• SKU: 2N0407272AA
• Mark: Volkswagen
• Condition: Used
• OEM Part Number: 2N0407272AA
• Substitutable numbers: 2N0407272AA, 2N0 407 272 AA
• Location on the vehicle: Front, Right
• Fuel type: Diesel
• Category: Driveshafts

Purpose and function in the drivetrain

The described front right driveshaft is responsible for the consistent transmission of power from the transmission to the wheel, while maintaining proper suspension geometry and joint operation. It has been designed specifically for Volkswagen models with a diesel unit, ensuring a perfect fit for the loads generated by the 2.0 TDI engine and compatibility with the factory front suspension.

Its placement on the front right side of the vehicle allows for the maintenance of proper weight distribution in the running gear, which translates into predictable vehicle behavior during acceleration, engine braking, and cornering.

Benefits of using an original driveshaft

Using an original driveshaft in the Volkswagen Crafter drivetrain allows for maintaining performance parameters close to factory specifications. In practice, this means:

• better cooperation with the existing transmission and suspension,
• maintaining correct front wheel geometry,
• stable torque transmission under typical operating conditions for a commercial vehicle,
• reduced risk of vibrations and unwanted play in the drivetrain.

For commercial vehicles such as the Crafter, this has a direct impact on driving comfort under load and the predictability of the vehicle's behavior in daily operation.

Technical characteristics and fitment

The driveshaft has been constructed to work with a diesel-based drivetrain, meaning it is adapted to the characteristic torque curve and dynamic loads. Its placement on the front right side of the vehicle determines the geometry of the joints and the length of the component, allowing for the maintenance of the proper range of suspension travel and wheel steering.

It is always recommended to verify the selection of the driveshaft for a specific vehicle based on the car's technical data and information contained in the specification to ensure full compatibility with the transmission used and the drivetrain configuration.

Condition and practical application

The component comes from dismantling, which allows for combining a favorable purchase cost with the preservation of the original design intended by the vehicle manufacturer. For many fleet users and workshops specializing in the service of commercial vehicles, this is a sensible choice for drivetrain repairs, especially in the case of intensively used vehicles.

If you are planning a comprehensive repair or upgrade of the drivetrain area in your Volkswagen and need other components from the same group, such as additional driveshafts, intermediate shafts, or connecting elements, check out the available parts in the Volkswagen Driveshafts category.

Technical support and additional knowledge

When selecting drivetrain components, including driveshafts, knowledge of gear ratio selection and drivetrain configuration can be helpful. It is worth reading the guide Dismantled drive axles and differentials – how to choose gear ratios for your driving style, which organizes key concepts and facilitates informed service decisions.

If you are also interested in the economic and environmental aspects of using dismantled components, the article Circular economy in your garage – how choosing used parts from dismantling really supports environmental protection and your wallet? may be helpful, showing how used drivetrain components fit into a modern approach to vehicle operation.