Volkswagen Touareg 7P Rear Door Seal Rubber Outer Left Right N/O/S 7P0839911A

Volkswagen Touareg 7P Rear Door Seal Rubber Outer Left Right is an original body component designed for installation on either the left or right side. It ensures a tight door closure, limits the ingress of water and noise into the cabin, and helps maintain stable conditions around the rear door area. Thanks to the factory fitment for the specific Volkswagen Touareg 7P model, the installation is precise and does not require any modifications to the body profile.

Specifications and technical data

• SKU: 7P0839911A
• Mark: Volkswagen
• Condition: Used
• OEM Part Number: 7P0839911A
• Substitutable numbers: 7P0839911A, 7P0 839 911 A
• Location on the vehicle: Rear, Right, Left
• Category: Door Seals

Purpose and function of the rear door seal

The presented rear door outer seal operates in the contact area between the door and the bodywork, on the outer side. Its tasks include:

• limiting the ingress of rainwater and contaminants into the door interior,
• reducing wind noise while driving,
• stabilizing the position of the door leaf relative to the body,
• protecting the sheet metal edges against accelerated corrosion.

The element is adapted to the rear axle of the vehicle and can be used on both the left and right sides, which facilitates selection during body repairs.

Construction and fitment for Volkswagen Touareg 7P

The seal has been designed specifically for the body geometry of the 7P generation Touareg, ensuring it maintains the correct contact line along the entire length of the door edge. The rubber profile is properly shaped to:

• maintain even pressure along the entire perimeter,
• function correctly during repeated opening and closing of the door,
• retain flexibility within the typical operating temperature range.

The original Volkswagen origin means compatibility with factory mounting points and proper fitment with the door panel and body pillar.

Benefits of using an original seal

Using a dedicated rear seal in the Touareg 7P allows for restoring the proper tightness of the door zone after bodywork repairs or replacement of side components. In practice, this translates into:

• more comfortable acoustics inside the vehicle,
• lower risk of moisture affecting the upholstery and electrical installation in the doors,
• stable door closing without the need for excessive adjustment of hinges and the lock.

For users who pay attention to the proper fitment of body components, this will be a practical service solution that allows maintaining the factory character of the vehicle.

Condition of the element and use in repairs

The offered seal comes from dismantling and is intended for re-installation in a vehicle where it is necessary to replace a worn or damaged rear door seal. This type of component will work well both for local post-collision repairs and for gradual renovation of the door zone in a daily-driven car.

Choosing a used original element is often a beneficial compromise between the quality of fitment and the cost of repair, especially in the case of specialized rubber profiles that must exactly match the shape of the bodywork.

Repair expansion and additional information

If you are planning a comprehensive repair or upgrade of the rear door zone in your Volkswagen and need other elements from the same group, such as additional perimeter seals, sealing strips, or protective profiles, check the available parts in the Volkswagen door seals category.

If you want to better understand how using parts from dismantling affects service costs and the environment, it is worth reading an article describing the practical aspects of reusing components in the automotive industry: Circular economy in your garage – how choosing used parts from dismantling really supports environmental protection and your wallet?