Volkswagen Amarok Mk2 Front Wishbone Control Arm Lower Right O/S MB3C-3078-G3C

The Volkswagen Amarok Mk2 Front Wishbone Control Arm Lower Right O/S is a component from the Control arms and ball joints group, designed for operation in the front suspension on the passenger side. It ensures stable wheel guidance, correct geometry, and predictable vehicle behavior during braking, acceleration, and driving over uneven surfaces.

Specifications and technical data

• SKU: MB3C-3078-G3C
• Mark: Volkswagen
• Condition: Used
• OEM Part Number: MB3C-3078-G3C
• Substitutable numbers: MB3C3078G3C, MB3C-3078-G3C, 2HJ407152D, 2HJ 407 152 D
• Location on the vehicle: Front, Right
• Category: Control Arms, Ball Joints & Assemblies

Purpose and function in the suspension

The presented control arm is designed for installation on the front axle on the right side, where it is responsible for precise wheel guidance relative to the body. As a load-bearing element of the suspension system, it transfers vertical and lateral loads, stabilizing the Amarok Mk2's trajectory both on asphalt and in off-road conditions.

The lower suspension arm works in conjunction with other components – springs, shock absorbers, and ball joints – to create a cohesive system that influences:

• maintaining proper wheel alignment and camber angles,
• reducing unwanted play in the suspension,
• body stability when driving with a load,
• driving comfort under varying front axle loads.

Compatibility and part identification

The control arm has been developed specifically for the Volkswagen Amarok Mk2, which facilitates the selection of the correct component for suspension repairs. Identification is based on manufacturer markings and reference numbers, which are visible in the technical specification section and allow for verification of compatibility with the vehicle's factory configuration.

Thanks to this solution, it is possible to precisely match the component to a specific version of the Amarok, minimizing the risk of installing an incorrect control arm and the associated problems with geometry or mounting.

Performance characteristics and installation benefits

The placement of the control arm on the front right side means it has a significant impact on the perceived stiffness of the vehicle's front end and the response to steering inputs. A correctly selected and installed component helps to reduce:

• knocking and vibrations transmitted to the body,
• uneven tire wear resulting from incorrect geometry,
• "wandering" of the front end at higher speeds.

After replacing the control arm, it is recommended to perform a wheel alignment to fully utilize the potential of the newly installed component and restore the Amarok's predictable handling.

Part condition and service application

The item comes from the group of used suspension components, which allows for economical repair while maintaining the original design and operating characteristics. This type of solution is particularly beneficial for comprehensive front-end overhauls when other system elements, such as additional control arms or ball joints, are being replaced at the same time.

The control arm will perform well in both standard road use and utility applications, where the Amarok works with a trailer or in more demanding surface conditions that require a stable and predictable suspension.

Related components and technical knowledge

If you are planning a comprehensive repair or upgrade of the suspension area in your Volkswagen and need other elements from the same group, such as additional control arms, ball joints, or mounts, check the available parts in the Volkswagen control arms and ball joints category.

To better understand the relationships between individual suspension components and the symptoms of their wear, it is worth consulting our technical guide: Suspension system – a comprehensive guide to shock absorbers, control arms, and stabilizers. This will make it easier to plan the scope of service work and select the right parts for your vehicle.