Range Rover L405 Wishbone Cross Member Lower Rear Suspension Left N/S LR037696

The Rear Left Lower Trailing Arm Bracket for Range Rover L405 is an original part from the Control Arms and Ball Joints group, designed for precise operation on the vehicle's rear axle. It ensures stable wheel guidance, correct suspension geometry, and predictable vehicle behavior during braking and cornering. This solution is dedicated to users expecting to maintain the factory driving parameters of their Range Rover.

Specifications and technical data

• SKU: LR037696
• Mark: Range Rover
• Condition: Used
• OEM Part Number: LR037696
• Substitutable numbers: JPLA-5B531-AA, JPLA5B531AA
• Location on the vehicle: Rear, Left
• Part type: Control Arm & Ball Joint Assembly
• Category: Control Arms, Ball Joints & Assemblies

Purpose and Function in Suspension

The lower trailing arm bracket, operating on the rear left side of the body, is responsible for maintaining the correct position of the hub relative to the body and for transferring loads from the wheel to the vehicle's structure. A correctly selected component in this area is crucial for:

• maintaining correct toe and camber angles,
• vehicle stability at higher speeds,
• even tire wear,
• effective damping of vibrations transmitted from the road surface.

By being tailored to the specific axle and side of the vehicle, the bracket works in conjunction with other suspension components, minimizing unwanted play and improving steering precision.

Original Origin and Fitment

This component has been designed specifically for Range Rover models, which translates to proper fitment with factory mounting points and compatibility with the original suspension geometry. The original design ensures:

• compliance with factory dimensional tolerances,
• correct interaction with other control arms and ball joints,
• installation without structural modifications.

Such precise fitment reduces the risk of incorrect wheel alignment after replacement and facilitates subsequent geometry adjustments at a diagnostic station.

Characteristics of a Used Component

As a used part, the rear suspension trailing arm bracket offers an economical solution for drivers who want to restore the functionality of the running gear while maintaining the original design. This type of component allows for:

• reduced repair costs compared to a new part,
• maintenance of the factory suspension specification,
• preservation of material consistency with other system components.

Before installation, a standard inspection of mounting points, bushings, and cooperating joints is recommended to fully utilize the potential of the replaced element.

Installation and Operational Recommendations

To fully leverage the capabilities of this control arm bracket, it is advisable to perform a professional wheel alignment of the rear axle after installation. This will allow for:

• minimizing tire wear,
• achieving stable cornering,
• eliminating vehicle pulling and unwanted vibrations.

During installation, pay attention to the correct tightening torque of the bolts and the element's position relative to the body, in accordance with the service procedures for Range Rover suspension.

More Suspension Components and Technical Knowledge

If you are planning a comprehensive repair or upgrade of the suspension area in your Range Rover and need other parts from the same group, such as additional control arms, ball joints, or brackets, check the available parts in the category Range Rover Control Arms and Ball Joints.

To better understand the relationships between shock absorbers, control arms, and stabilizers, as well as the symptoms of wear in these components, it is worth consulting a practical guide: Suspension System – A Comprehensive Guide to Shock Absorbers, Control Arms, and Stabilizers. This will help you better assess when the replacement of a single component should be extended to include additional service work.