Jaguar X-Type X400 Front Lower Wishbone Control Arm Right O/S 4X43-3042-AB

Jaguar X-Type X400 Front Lower Wishbone Control Arm Right O/S is an original component from the Control Arms and Ball Joints group, designed for operation on the front right side of the vehicle. Engineered specifically for Jaguar X-Type X400 models, it ensures proper suspension geometry, stable handling, and predictable vehicle behavior during braking and cornering.

Specifications and technical data

• SKU: C2S39661
• Mark: Jaguar
• Condition: Used
• OEM Part Number: C2S39661
• Substitutable numbers: C2S39661, 4X433042AB, 4X43-3042-AB
• Location on the vehicle: Front, Right
• Category: Control Arms, Ball Joints & Assemblies

Purpose and function in the suspension system

This front lower wishbone on the right side is responsible for precise wheel guidance relative to the body, transferring road loads, and maintaining specified camber and toe angles. As a structural element working with the ball joint and other suspension components, it has a direct impact on:

• driving stability at higher speeds,
• steering system response to steering wheel movements,
• even tire wear,
• shock absorption comfort. Thanks to its adaptation to the specific suspension architecture of the Jaguar X-Type X400, the wishbone maintains factory operating parameters, which is particularly important in premium class vehicles.

Original origin and fitment for Jaguar X-Type X400

The offered wishbone is a component intended for use in the Jaguar X-Type X400 model, which means that its geometry, mounting points, and operating characteristics have been developed for this specific suspension. Factory fitment translates into:

• proper alignment with the body and steering knuckle on the right side,
• no need for modifications or adaptations during installation,
• maintenance of the handling characteristics intended by the manufacturer. For users who value original Jaguar solutions, such a choice of component is beneficial both in terms of technical performance and operational life.

Operating characteristics on the front right side

The placement of the wishbone on the front right axle of the vehicle means it operates in a critical area responsible for steering and stability. In practice, this means that this element must withstand:

• lateral forces generated during cornering,
• vertical loads resulting from vehicle weight and road irregularities,
• longitudinal forces generated during braking and acceleration. The good condition of the wishbone in this location is crucial for maintaining proper suspension geometry on the driver's or passenger's side (depending on the steering wheel version), and thus for the safety and predictability of the car's behavior.

Practical service application

Replacing the front lower wishbone on the right side is recommended in situations where there is play in the ball joints, knocking in the suspension, problems with maintaining wheel alignment, or uneven tire wear. A properly selected wishbone allows for restoring correct suspension operation without interfering with the vehicle's structure. After installation, it is recommended to perform a geometry alignment to fully utilize the potential of the newly installed component. To better understand the role of this component in the entire system, it is worth checking out the guide material describing the cooperation of shock absorbers, wishbones, and stabilizers – this is discussed in detail in the article Suspension system – a comprehensive guide to shock absorbers, wishbones, and stabilizers.

Expanding suspension work on your Jaguar

If you are planning a comprehensive repair or upgrade of the suspension zone in your Jaguar and need other elements from the same group, such as additional wishbones, ball joints, or related steering components, check the available parts in the Jaguar Control Arms and Ball Joints category.

Summary

Jaguar X-Type X400 Front Lower Wishbone Control Arm Right O/S is a solution for users who want to maintain the factory handling and stability characteristics of their car. Proper fitment to the specific model, correct geometry, and design for operation on the front right side make this a component that allows for a technically correct suspension repair while maintaining comfort and predictable vehicle behavior on the road.