Mercedes W169 W245 Front Right O/S Suspension Control Track Arm A1693301007

Mercedes W169 W245 Front Right Suspension Control Arm is an item from the Control Arms and Ball Joints category, designed for the front right corner of the suspension. It is responsible for precise wheel guidance, driving stability, and correct geometry, which translates into safe and predictable handling of the Mercedes car on the road.

Specifications and technical data

• SKU: A1693301007-1
• Mark: Mercedes (Genuine OE)
• Condition: Used
• OEM Part Number: A1693301007
• Substitutable numbers: A1693301007, A 169 330 10 07, A1693300407, A 169 330 04 07, BG
• Location on the vehicle: Front, Right
• Category: Control Arms, Ball Joints & Assemblies

Purpose and Function in the Suspension System

The presented control arm is designed for the front right axle, where it transfers loads from the wheel to the body and works with other suspension components. A properly selected control arm:

• maintains correct wheel geometry during driving and braking,
• limits unwanted wheel movements in the transverse and longitudinal planes,
• supports even tire wear and vehicle stability at higher speeds.

Thanks to its adaptation to a specific axle and side of the vehicle, installation is predictable, and cooperation with ball joints and other suspension components proceeds in accordance with the manufacturer's design assumptions.

Benefits of Using an Original Mercedes Control Arm

The control arm in this offer comes from the Mercedes-Benz OE line, which means maintaining factory operating parameters and compatibility. In practice, this translates to:

• secure fit to the body and steering knuckle mounts,
• cooperation with standard ball joints and other system components,
• maintaining the handling characteristics intended for W169 and W245 models.

An element from this category is particularly important when noticeable play in the suspension is felt, the car pulls to one side during braking, or uneven tire wear occurs – replacing it with the correct control arm restores stability and predictable handling.

Condition, Verification, and Preparation for Installation

The offered control arm is used, allowing for economical repair while maintaining the original manufacturer's specifications. Before being introduced for sale, the component is verified for structural integrity and suitability for further use. This ensures that the customer receives a component ready for installation after standard workshop servicing (inspection of ball joints, bushings, possible replacement of wear parts if repair technology allows).

Installation in a professional service center is recommended, followed by wheel alignment, to fully utilize the potential of the newly installed control arm and avoid accelerated wear of tires and other suspension components.

Selection, Compatibility, and Technical Support

Selecting the correct control arm for a specific body version and engine is crucial for proper suspension operation. This model belongs to the Control Arms and Ball Joints group dedicated to Mercedes vehicles, which facilitates integration with the chassis. If in doubt, it is advisable to compare the shape and mounting points with the currently installed component and seek specialist assistance.

If you are interested in other Mercedes control arms and ball joints, check the available products in the category: Mercedes control arms and ball joints.

More About Suspension System Operation

To better understand the role of control arms in the entire chassis system and the symptoms of their wear, it is worth reading the guide on shock absorbers, control arms, and stabilizers. Practical tips can be found in the article: Suspension System – A Comprehensive Guide to Shock Absorbers, Control Arms, and Stabilizers. This will help you more easily plan further diagnostics and potential service work on your Mercedes.