Audi A5 F5 Front Wishbone Lower Control Arm Right O/S 8W0407152C

Audi A5 F5 Front Wishbone Lower Control Arm Right O/S is a component from the Control arms and ball joints group, designed for operation in the front right corner of the suspension. It is responsible for precise wheel guidance, driving stability, and proper load transfer from the road to the chassis, which directly impacts safety and driving comfort.

Specifications and technical data

• SKU: 8W0407152C
• Mark: Audi
• Condition: Used
• OEM Part Number: 8W0407152C
• Substitutable numbers: 8W0407152C, 8W0 407 152 C
• Location on the vehicle: Front, Right
• Category: Control Arms, Ball Joints & Assemblies

Purpose and function in the suspension system

The control arm with ball joint mounted on the front, right axle in the Audi A5 F5 acts as a key component guiding the wheel relative to the chassis. It is responsible for maintaining proper suspension geometry, including camber and toe angles, which translates into:

• stable vehicle behavior at higher speeds,
• precise steering response,
• even tire wear,
• reduction of unwanted vibrations and play in the running gear.

The ball joint integrated with the control arm provides a movable yet controlled connection to the wheel hub, enabling smooth suspension operation during turns and compression without losing connection rigidity.

Benefits of using an original Audi component

Choosing a control arm dedicated to an Audi from this series means maintaining factory suspension performance parameters. Original geometry and stiffness characteristics allow you to avoid problems typical of aftermarket replacements, such as altered steering feel or accelerated tire wear. The component has been designed to work with factory shock absorbers, springs, and the stabilizer bar, which facilitates maintaining the consistency of the entire system.

The control arm is a part from the used Audi components market, which allows for economical repair while maintaining compliance with the manufacturer's solutions. This is a good solution for suspension service when you want to match the vehicle's original design.

Selection and installation in the front suspension

The placement on the vehicle defined as front – right side facilitates unambiguous selection of the element for a specific position in the suspension. When replacing, it is worth paying attention to:

• checking the condition of other control arms and ball joints on the front axle,
• inspecting the metal-rubber bushings cooperating with this mounting point,
• mandatory suspension geometry alignment after installation.

A properly installed control arm with ball joint restores the rigidity of suspension connections, reduces knocking and play, and improves the predictability of the car's behavior on bumps and in corners. This is particularly important in Audi A5 class vehicles, where the running gear is tuned for dynamic yet comfortable driving.

Operation and wear diagnostics

During operation, it is worth periodically checking the condition of the ball joint and the control arm mounting points. Symptoms such as:

• knocking when driving over bumps,
• noticeable play in the steering wheel,
• vehicle pulling while driving straight,
• uneven tire tread wear

may indicate the need to replace this component. Using a properly selected control arm from the Control arms and ball joints group allows you to restore correct suspension performance parameters and limit further, secondary damage to other components.

Suspension service expansion and technical knowledge

If you are planning a comprehensive repair or upgrade of the suspension area in your Audi and need other elements from the same group, such as additional control arms, ball joints, or mounting hardware, check the available parts in the Audi control arms and ball joints category.

To better understand the relationships between shock absorbers, control arms, and stabilizers and their impact on driving safety, it is worth consulting our guide material – you will find practical information in the article Suspension system – a comprehensive guide to shock absorbers, control arms, and stabilizers, which helps in consciously planning suspension service in cars of various brands.