Skoda Octavia II Wishbone Control Arm Front Right O/S Suspension 1K0407152T

Right Front Control Arm for Skoda Octavia II is a component from the Control Arms and Ball Joints group, designed for the front suspension on the passenger side. It is responsible for precise wheel guidance, driving stability, and correct geometry, which translates into safe and predictable vehicle behavior on the road.

Specifications and technical data

• SKU: 1K0407152T
• Mark: Skoda
• Condition: Used
• OEM Part Number: 1K0407152T
• Substitutable numbers: 1K0407152T, 1K0 407 152 T
• Location on the vehicle: Front, Right
• Category: Control Arms, Ball Joints & Assemblies

Purpose and Function in Suspension

The presented control arm is designed for installation in the front right suspension, where it transfers loads between the body and the wheel hub. Its task is to maintain the correct position of the wheel relative to the body during acceleration, braking, and encountering uneven surfaces, which limits undesirable changes in toe and camber.

The control arm works with ball joints and other system components, creating a stable, flexible connection. This allows the suspension to operate in a controlled manner, and the driver maintains confidence in handling both in the city and at higher speeds.

Benefits of Using an Original Skoda Control Arm

Using a component dedicated to Skoda allows for the preservation of factory handling and ride comfort parameters. The correct arm geometry, mounting points, and interaction characteristics with the ball joint and other suspension elements are tailored to the body structure and steering system of the specific model.

• stable vehicle handling during braking and lane changes,
• more even tire wear due to maintained correct geometry,
• reduced vibrations transmitted to the body,
• consistent interaction with the factory steering system.

For the user, this means predictable car behavior in emergency situations and better vehicle control during daily operation.

Selection and Installation of the Right Front Control Arm

Before installation, it is advisable to verify the component's compatibility with the specific Skoda version by using the OEM part number and interchangeable numbers available in the technical specification. This facilitates unambiguous matching to the given body variant and suspension system.

During replacement, it is recommended to:

• check the condition of ball joints and other cooperating elements,
• use appropriate tightening torques in accordance with service documentation,
• perform a geometry adjustment after installation is complete.

This approach allows for the full utilization of the newly installed control arm's potential and reduces the risk of accelerated tire wear or unstable handling.

Component Condition and Practical Application

The offered control arm is a used part, which is a cost-effective solution for drivers looking for a technically sound component at a reasonable price. In practice, it will be suitable for both post-collision repairs and standard replacement of worn suspension elements when noises, vehicle pulling, or uneven tire wear occur.

To better understand the role of the control arm in the entire suspension system and the relationships between shock absorbers, control arms, and stabilizers, it is recommended to consult the educational material: Suspension System – A Comprehensive Guide to Shock Absorbers, Control Arms, and Stabilizers. This will allow for informed planning of further service work and selection of appropriate components.

Expanding Suspension Repairs for Skoda

If you are planning a comprehensive repair or upgrade of the suspension area in your Skoda and need other parts from the same group, such as additional control arms, ball joints, or mounting elements, check the available parts in the Skoda Control Arms and Ball Joints category.