Camshaft Exhaust BMW F01 F03 F10 F12 F13 Petrol N63 Camshaft Cyl. 5-8 7629526

BMW F01 F10 F12 F13 Gasoline N63 Exhaust Camshaft Cyl. 5-8 is an original part from the Camshafts group, designed for N63 gasoline engines in selected BMW 5, 6, and 7 Series models. Precise cam geometry for cylinders 5-8 ensures proper control of the exhaust valves, which translates to stable engine operation and correct power characteristics.

Specifications and technical data

• SKU: 7629526
• Mark: BMW (Genuine OE)
• Condition: Used
• OEM Part Number: 7629526
• Substitutable numbers: 7629526, 11317629526, 7568205, 11317568205
• Fuel type: Petrol
• Category: Camshafts

Purpose and Role in the N63 Engine

The presented exhaust camshaft serves cylinders 5-8 in the N63 gasoline engine, used in BMW F01, F10, F12, and F13 models. It is responsible for the precise opening and closing of the exhaust valves, which is crucial for proper exhaust gas evacuation, maintaining adequate combustion chamber pressure, and preserving factory performance parameters.

In V8 engines, such as the N63, the correct operation of the exhaust camshaft influences:

• stable idle and under load operation,
• proper throttle response across the entire RPM range,
• maintaining the proper refinement of the powertrain.

Benefits of Using an Original BMW Camshaft

Using an original camshaft in the N63 engine allows for the preservation of the factory camshaft system's operating characteristics, without the risk of dimensional mismatch or deviations in cam profile. This is particularly important in modern gasoline engines where tolerances are very tight, and the camshaft control system works with advanced engine electronics.

The main advantages of using this part include:

• compliance with BMW's factory specifications for the N63 engine,
• restoration of correct exhaust valve synchronization for cylinders 5-8,
• reduction of the risk of secondary damage to the cylinder head and exhaust system.

Product Characteristics and Condition

The offered camshaft is a used part from disassembly, representing a reasonable compromise between repair cost and maintaining original BMW quality. This type of part is particularly attractive for comprehensive overhauls of N63 gasoline engines, where replacing the entire set of new components would be significantly more expensive.

The exhaust camshaft for cylinders 5-8 is designed for operation in units powered by gasoline fuel, ensuring its compatibility with the thermal characteristics and loads typical for this type of engine. This allows it to be used for both routine repairs and major camshaft system upgrades.

Selection and Practical Application in Service

When selecting a camshaft for a BMW F01, F10, F12, or F13 with an N63 engine, it is crucial to verify compatibility with the specific engine version and cylinder head configuration. The offered part is intended for the exhaust section for cylinders 5-8, therefore it should be installed according to BMW service procedures, maintaining the correct camshaft timing and tightening torques.

In workshop practice, this type of camshaft is used, among other situations:

• excessive wear of cams and lifters on the exhaust side,
• mechanical damage to the cylinder head on the side of cylinders 5-8,
• major overhaul of the N63 engine, when replacement of several camshaft components is necessary.

Related Parts and Service Knowledge

If you are planning a comprehensive repair or upgrade of the engine area in your BMW and need other parts from the same group, such as additional camshafts, variable valve timing components, or cooperating cylinder head components, check the available parts in the BMW Camshafts category.

When working with modern BMW units and their electronics, it is also worthwhile to expand your knowledge on diagnostics and the use of parts from disassembly – practical tips can be found in the article Years of Driving Pleasure – How to Care for iDrive Systems and Electronic Modules in BMW 3 and 5 Series Models Using Parts from Disassembly?.