Audi A6 C7 A7 4G Front Wheel Brake Caliper Right O/S 345x30 8R0615108G

The Front Right Brake Caliper for Audi A6 C7 / A7 4G, designed to work with a 345x30 disc, is an original component of the Audi braking system, ensuring stable and predictable front axle braking performance. This solution is dedicated for installation on the outer driver's side (right side of the vehicle), engineered for the demanding operating conditions of modern premium models.

Specifications and technical data

• SKU: 8R0615108G
• Mark: Audi
• Condition: Used
• OEM Part Number: 8R0615108G
• Substitutable numbers: 8R0615108G, 8R0 615 108 G, 8R0615106BQ, 8R0 615 106 BQ
• Location on the vehicle: Front, Right
• Part type: Brake Caliper & Bracket
• Category: Calipers & Brackets

Intended Use and Brake System Compatibility

The offered caliper belongs to the Brake Calipers and Brackets category and has been specifically constructed for the front right side of Audi A6 C7 and Audi A7 4G models. The design, intended for use with a 345 mm diameter and 30 mm thick disc, allows for efficient heat dissipation and stable transfer of braking forces in heavier and more powerful vehicles.

The vehicle placement specified as front – right side ensures correct mounting geometry relative to the hub, disc, and steering knuckle, which translates to even pad wear and proper operation of the entire system.

Construction and Technical Characteristics

The caliper has been designed as an OEM component, adhering to factory Audi standards regarding body rigidity, pad guidance, and mounting point placement. This ensures:

• stable pad positioning relative to the disc during intensive braking,
• even pressure distribution on both sides of the disc,
• reduced risk of vibrations and unwanted noises in the braking system.

The caliper's geometry is adapted for a 345x30 disc, allowing for optimal utilization of the friction surface and effective dissipation of thermal energy in both urban and highway conditions.

Benefits of Using an Original Used Caliper

Choosing an original, used Audi brake caliper is a solution that combines cost control with the preservation of factory system operating parameters. Compared to low-cost aftermarket alternatives, an OEM part offers:

• factory-fit compatibility with the steering knuckle, hub, and brake disc,
• compliance with the standard operating characteristics of the ABS/ESP system,
• consistency with other front axle brake system components.

The used condition allows for economical repair or upgrade of the braking system without compromising the original Audi design, which is particularly important for maintaining predictable vehicle behavior during emergency braking.

Practical Application in Service

This front right brake caliper is suitable for both standard replacement of a worn component and for rebuilding the entire brake axle on Audi A6 C7 or A7 4G models with 345x30 discs. Thanks to its factory design, installation is predictable for the mechanic, and after proper system bleeding, full brake functionality can be quickly restored.

If you are planning a comprehensive repair or upgrade of the braking area in your Audi and require other parts from the same group, such as front calipers, rear calipers, or mounting brackets, check the available parts in the Audi Brake Calipers and Brackets category.

Technical Support and Knowledge on Recycled Parts

When selecting a used brake caliper, it is advisable to consult reliable sources of information regarding safety, cost-effectiveness, and proper installation procedures. To better understand how to make informed choices about original recycled parts and how to reduce brake system repair costs without compromising safety, read the article Brake Calipers Under the Microscope: How to Effectively Reduce Brake System Repair Costs by Choosing Proven Recycled Parts.