Skoda Superb 3V Mk3 Rear Brake Caliper Housing Right O/S 3Q0615424

The Rear Right Brake Caliper Bracket for Skoda Superb 3V Mk3 is an original caliper bracket designed for the rear axle on the passenger side. This component, from the Brake Calipers and Brackets category, ensures proper pad guidance and stable mounting of the braking mechanism, contributing to safe and predictable system operation. Due to its factory origin, it is a part that is structurally well-matched to the braking system of the third-generation Skoda Superb.

Specifications and technical data

• SKU: 3Q0615424
• Mark: Skoda
• Condition: Used
• OEM Part Number: 3Q0615424
• Substitutable numbers: 3Q0615424, 3Q0 615 424
• Location on the vehicle: Rear, Right
• Part type: Brake Caliper & Bracket
• Category: Calipers & Brackets

Application and Fitment for Skoda Superb 3V Mk3

The presented rear right brake caliper bracket has been specifically designed for the Skoda Superb 3V Mk3 model. Its placement on the vehicle is limited to the rear axle on the outer side (right), which facilitates unambiguous component selection during single-side repairs or replacements.

The original caliper bracket guarantees:

• correct mounting geometry relative to the hub and disc,
• compatibility with factory bolt and guide spacing,
• stable seating of the braking system's working components.

Technical and Functional Characteristics

As a component responsible for pad guidance and maintaining the caliper in the correct position, the bracket operates in close proximity to the brake disc. Precise machining of the mounting surfaces allows for maintaining pad parallelism to the disc, promoting even wear of the pads and stable braking torque.

The rear right brake caliper bracket in this configuration:

• transfers the mechanical loads generated during braking,
• ensures proper guidance of pins and slide bushings,
• maintains a fixed position relative to suspension components and the wheel hub.

Condition of the Part and Benefits of Using a Used Part

The offered brake caliper bracket is a used part, sourced from vehicle dismantling. This type of component, with appropriate visual inspection and replacement of wear parts (guides, rubber boots, mounting bolts), can continue to function effectively in the braking system, offering a sensible compromise between cost and functionality.

Choosing an original, used caliper allows you to:

• maintain factory fitment to the body and suspension structure,
• reduce the risk of assembly issues typical of some aftermarket replacements,
• lower the cost of brake system repair while maintaining an adequate level of safety.

To better understand how to safely use salvaged parts in your braking system, we recommend reading the article: Brake Calipers Under the Microscope: How to Effectively Reduce Brake System Repair Costs by Choosing Proven Salvaged Parts.

Role in the Braking System and Service Aspects

The rear right caliper bracket in the Skoda Superb 3V Mk3 is responsible for maintaining the caliper's constant position relative to the disc and for proper pad guidance during operation. A correctly selected and installed component minimizes the risk of the vehicle pulling to one side during braking, uneven pad wear, or excessive vibrations.

During installation, it is recommended to:

• thoroughly clean the contact surfaces with the caliper carrier and suspension components,
• inspect the condition of the guides and replace the grease in the sliding points,
• use new mounting bolts in accordance with the vehicle manufacturer's recommendations.

Skoda Braking System Expansion – Related Components

If you are planning a comprehensive repair or upgrade of the braking area in your Skoda and require other components from the same group, such as additional brackets, caliper carriers, or complete caliper bodies, check the available parts in the Skoda Brake Calipers and Brackets category.