Audi A6 C6 Front Panel Radiator Support Mount Bracket Right O/S 4F0809892A

The Right Front Radiator Panel Bracket for Audi A6 C6 is an original body part from the Bumpers and Reinforcements group, designed for installation on the right front side of the vehicle. It provides stable support for the front panel and cooling components, ensuring the correct geometry of the front body section and secure mounting of the bumper and accessories.

Specifications and technical data

• SKU: 4F0809892A
• Mark: Audi
• Condition: Used
• OEM Part Number: 4F0809892A
• Substitutable numbers: 4F0809892A, 4F0 809 892 A
• Location on the vehicle: Front, Right
• Category: Bumpers & Reinforcements

Purpose and Function of the Component

The presented bracket is structurally adapted for the front right side of the Audi A6 C6 generation. It is responsible for the precise positioning of the radiator panel and maintaining the correct arrangement of reinforcements in the bumper area. A correctly selected and installed component reduces the risk of stress in the vicinity of the radiator, headlights, and hood, which is important for both safety and the durability of the entire front of the vehicle.

The bracket operates in a critical body area where various structural components connect. Therefore, its proper fit to the model and mounting side is crucial for maintaining factory geometry and correct alignment with the bumper, grille, and other reinforcements.

Construction and Fit for Audi

As an Audi branded part, the bracket has been designed for factory fit to the A6 C6 body. The mounting holes, shape, and attachment points are consistent with the original vehicle construction, which facilitates installation and avoids modifications. This allows the part to be used for both post-accident repairs and for replacing worn or damaged front end reinforcements.

The placement on the vehicle, specified as the front – right side, minimizes the risk of errors when selecting the component and allows for unambiguous assignment of the part to the correct body zone. This is particularly important when working with the cooling system and bumper, where dimensional tolerances are small.

Condition, Application, and Benefits of Installation

The offered bracket comes from the Bumpers and Reinforcements category and is intended for reinstallation in a vehicle. A used component of this type allows for an economical yet technically correct repair of the front body section, while maintaining the original mounting structure. This is a practical solution for rebuilding the front end after a collision or for replacing damaged radiator panel reinforcements.

Using an original bracket translates to:

• better alignment of the bumper and front panel with respect to the fenders and hood,
• stable support for the cooling system,
• maintaining the front zone stiffness as designed by the manufacturer.

Selection by Numbers and Additional Support

For complete certainty of fit, it is advisable to verify the part's compatibility using the OEM number and interchangeable numbers – all this information can be found in the technical specifications section. If you have doubts, comparing the shape and mounting points with the component removed from the vehicle may be helpful.

If you want to deepen your knowledge on safely selecting components by catalog numbers and avoid mistakes in online purchases, use the practical guide: Risk-Free Online Parts Shopping – 5 Proven Ways to Verify Component Compatibility.

Related Reinforcement Parts for Audi

If you are planning a comprehensive repair or upgrade of the front end area of your Audi and need other parts from the same group, such as bumper reinforcements, support beams, or additional radiator panel brackets, check the available parts in the Audi Bumpers and Reinforcements category.