BMW 3 F30 F31 Side Panel Wing Fender Front Right O/S Schwarz 2 Black - 668

Visual condition of the part

Possible scratches and paint chips – condition as shown in the product photos.

The BMW 3 F30 F31 Side Panel Wing Fender Front Right O/S Schwarz 2 Black - 668 in Schwarz 2 – 668 color is an original body component designed for the front right side of the vehicle. Thanks to its factory shape and precise profile, it ensures proper body line alignment and solid protection for the wheel and front engine compartment. It is a practical solution for post-accident repairs, corrosion correction, or replacing a damaged part.

Specifications and technical data

• SKU: 9621598-SCH
• Mark: BMW (Genuine OE)
• Condition: Used
• OEM Part Number: 9621598
• Substitutable numbers: 41009621598, 9621598, BG
• Weight: 150
• Location on the vehicle: Front, Right
• Color: Schwarz 2 - 668
• Category: Body Side & Quarter Panels

Purpose and fitment for BMW 3 F30/F31

The presented fender is designed specifically for the BMW 3 series F30/F31 generation, intended for the front right side. The appropriate profiling of edges, mounts, and stampings allows for installation in place of the factory part without the need for structural modifications. The body geometry is maintained, which facilitates the adjustment of gaps relative to the hood, doors, and bumper.

Technical characteristics and Schwarz 2 – 668 color

The fender is manufactured as a structural body component, whose task is to cover the wheel, guide airflow, and protect against dirt and minor mechanical damage. The applied Schwarz 2 – 668 paint is a classic, deep BMW black, often chosen for cars with an elegant, understated character. For many users, this means the possibility of reducing paint work if the vehicle has the same color code.

Condition of the part and benefits of choosing a used component

The part comes from the secondary market, which allows for combining reasonable repair costs with the preservation of original structural quality. A used fender is a good solution when you care about factory fitment while wanting to avoid the high costs of purchasing a new body part. A properly selected component helps restore the correct appearance and functionality of the vehicle's front section.

Application in the wheel arch and fender zone

As a part from the Wheel arches and rear fenders group, this fender works with other body shielding elements, such as inner wheel arch liners, mounts, or trim strips. When properly installed, it supports protection against water, mud, and road salt, which is important for the durability of sills, side members, and other structural elements in the wheel zone.

Installation recommendations and part selection

Before installation, it is recommended to verify the compatibility of the part with the specific body version and to check the mounting points. In workshop practice, the following is often performed:

• a "dry" fit to set gaps and body lines,
• checking compatibility with the headlight, bumper, and door,
• potential surface preparation for repainting, if required.

Thanks to the preservation of factory geometry, the fender works well with original mounting elements and wheel arch covers, which facilitates body and paint work.

If you are planning a comprehensive repair or upgrade of the wheel arch zone in your BMW and need other parts from the same group, such as covers, inner wheel arch liners, or additional panels, check the available parts in the BMW wheel arches and rear fenders category.

When planning broader body or chassis repairs, it is also worth paying attention to the selection of other mechanical and drivetrain components; helpful information on the cost-effectiveness of purchasing used components can be found in the article Used gearbox – when is it worth it and what you need to remember.