Audi A6 C6 Side Panel Front Right O/S Wing Fender Light Silver Metallic - Y7W

Visual condition of the part

Possible scratches and paint chips – condition as shown in the product photos.

Audi A6 C6 Side Panel Front Right O/S Wing Fender Light Silver Metallic - Y7W is an original body component designed for precise installation on the passenger side. Thanks to the factory paint in Light Silver Metallic, it ensures a consistent look with the remaining body panels and facilitates post-accident repairs without the need for full repainting of the entire side of the vehicle.

Specifications and technical data

• SKU: 4F0821104A-LS
• Mark: Audi
• Condition: Used
• OEM Part Number: 4F0821104A
• Substitutable numbers: 4F0821104A, 4F0 821 104 A
• Location on the vehicle: Front, Right
• Color: Light Silver Metallic - Y7W
• Category: Body Side & Quarter Panels

Purpose and fitment

The presented item is a front right side body panel (fender) dedicated to the Audi A6 C6 generation model. The design is compatible with factory mounting points, allowing for installation in place of a damaged fender without the need for bodywork modifications. The original edge geometry near the doors, bumper, and hood promotes proper gap alignment and maintains the factory body line.

Color and paint finish

The fender is finished in Light Silver Metallic – Y7W, characteristic of many Audi A6 C6 units. Using the original paint shade:

• facilitates visual matching to the vehicle's existing paint coating,
• limits the scope of paint work to potential local touch-ups,
• allows for faster restoration of the side body aesthetics after a collision or corrosion.

For body and paint shops, this means time savings during component preparation and greater predictability of the final result.

Technical characteristics of the component

As a body group component, the fender is responsible for shaping the front line of the vehicle and protecting the wheel arch area. The construction has been designed to work with the factory mounting of the headlight, bumper, and wheel arch liners. As a result, after proper installation, the following are maintained:

• stability of the front bumper and headlight mounting,
• proper protection against dirt and water in the wheel arch area,
• aerodynamic continuity of the side body section.

The item comes from the Wheel arches and rear fenders segment, however, in this case, it serves as a front side panel on the right side, which is important when selecting parts for a specific body configuration.

Condition and use in repairs

The product is used, which makes it an attractive solution for economical vehicle repair, especially for older Audi A6 C6 model years. This type of component is suitable in situations where:

• replacement of a damaged fender after a collision is necessary,
• body repair of the old component is not cost-effective,
• reducing costs while maintaining original manufacturing quality is a priority.

Choosing an original, used body panel allows for maintaining material consistency with the rest of the body and avoiding fitment issues typical of cheaper replacements.

Repair expansion and selection of other components

If you are planning a comprehensive repair or upgrade of the wheel arch and fender zone in your Audi and need other elements from the same group, such as additional panels, covers, or supplementary plating fragments, check out the available parts in the Audi wheel arches and rear fenders category.

To better plan the full scope of body and paint work and efficiently collect all necessary body components in one place, it is worth checking out the guide: Comprehensive supply: from the engine to the smallest clip – how to collect used car parts in one place?.