Ford Kuga Mk2 Wheel Arch Moulding Trim PDC Front Right O/S CV44-S16D238-B

Visual condition of the part

The product shows signs of use visible in the photos. Ford Kuga Mk2 Wheel Arch Moulding Trim PDC Front Right O/S is an original body component from the Protective and decorative mouldings group, designed for installation on the front right wheel arch. Designed specifically for this model, it ensures a consistent fit with the body lines and proper integration with the PDC parking sensor system.

Specifications and technical data

• SKU: CV44-S16D238-B
• Mark: Ford
• Condition: Used
• OEM Part Number: CV44-S16D238-B
• Substitutable numbers: CV44-S16D238-B, CV44S16D238B, CV44-S16D238-BD59QR, 1818214
• Location on the vehicle: Front, Right
• Part type: Wheel Arch
• Category: Body Mouldings & Trims

Purpose and function of the component

The described wheel arch moulding is dedicated to the second-generation Ford Kuga and is mounted in the front right wheel arch area. Its task is to protect the fender edge from minor mechanical damage and to provide an aesthetic finish to the transition between the bumper, fender, and wheel arch. The integrated slots for PDC parking sensors allow for the proper operation of the factory parking assistance system. Thanks to a design compliant with Ford's factory standards, the moulding maintains the correct geometry and enables proper alignment with adjacent body panels, which is important for both visual and functional reasons.

Construction and body fitment

The wheel arch moulding is designed as an exterior component mounted on the fender edge in the front right part of the vehicle. The profile of the moulding corresponds exactly to the shape of the Ford Kuga Mk2 wheel arch, which facilitates installation and reduces the risk of stress on the paintwork and plastic elements. Factory mounts and proper edge guidance ensure:

• stable seating on the body without the need for modifications,
• correct alignment relative to the bumper and fender,
• maintenance of panel gaps in accordance with factory specifications. Such fitment translates into a consistent appearance of the side body section and reduces the risk of dirt ingress around the mounting points.

Integration with the PDC system

The component is adapted to work with PDC parking sensors in the front part of the vehicle. Properly prepared slots for the sensors allow for their correct seating and maintenance of the proper operating angle relative to the surroundings, which is important for the accuracy of distance measurement. The correct geometry of the moulding in the sensor area affects:

• stable mounting of the sensors in the intended positions,
• uninterrupted emission and reception of the ultrasonic signal,
• proper cooperation with the factory parking system software. Thanks to this, after replacing the component, you can maintain the functionality of the PDC system without the need for additional body modifications.

Characteristics of the used product

The wheel arch moulding is offered as a used Ford part, sourced from dismantling. This type of component is a beneficial solution for post-accident repairs or restoring the vehicle to a state close to factory condition, especially when you want to maintain the original body specification. Choosing an original, used wheel arch moulding allows for:

• maintaining compliance with the factory styling line of the Ford Kuga Mk2,
• preserving the original mounting points and shape of the element,
• reducing costs compared to new parts while maintaining proper fitment.

Application in repairs and upgrades

This component will work well both for local repairs after a collision in the front right part of the vehicle and for replacing worn or damaged wheel arch mouldings resulting from daily use. It can also be used for visual refreshing of the bodywork when you care about even alignment and a consistent side line. If you are planning a comprehensive repair or upgrade of the wheel arch and sill area in your Ford and need other elements from the same group, such as covers, overlays, or additional mouldings, check the available parts in the Protective and decorative mouldings Ford category.

Technical knowledge and part selection

When selecting body components from the secondary market, it is worth paying attention to compatibility with the specific model generation and the intended use for additional systems, such as PDC. In the case of other sub-assemblies – especially in the fuel supply area – a conscious approach to purchasing used parts is crucial. Detailed tips on the safe selection of components from dismantling can be found in the article Fuel dosing problems: what to look for when buying a used injection pump and fuel rails?. If you are preparing your car for intensive use in more difficult conditions, a seasonal guide may also be helpful, in which it is discussed which used elements are worth checking before the period of low temperatures: Winter essential: which used car parts are worth checking and replacing before the frost?.